IQ Panel 5 Verizon LTE Frequently Asked Questions
What Does Each Sensor Group Mean on the IQ Panel 5 System?
Learn what each sensor group means on the IQ Panel 5, from entry-exit delay and instant perimeter to motion, safety, panic, glass break, and water groups.
How Do I Adjust Panel Motion Sensitivity on the IQ Panel 5?
Learn how to adjust panel motion sensitivity on the IQ Panel 5. Open Panel Motion Settings, touch Setting, and choose High, Medium, or Low. Low is the default.
How Do I Turn Off Alarm Photos on the IQ Panel 5 Security System?
Learn how to turn off Alarm Photos on the IQ Panel 5. Go to Installation, Camera Settings, and turn off the Alarm Photos toggle. The camera stops taking them.
How Do I Use the Activity Monitor on the IQ Panel 5 System?
Learn how to use the Activity Monitor on the IQ Panel 5. Touch Activity Monitor on the Settings page, then choose Quick Access or Deactivate for 24 hour zones.
What Is IQ Installer and What Can It Do on the IQ Panel 5 System?
The IQ Installer app lets you program the IQ Panel 5 over WIFI from a phone. Learn what it does and how to connect it by scanning the panel's QR code.
How Do I Enable Power Down Communication on the IQ Panel 5?
Enable Power Down Event Communication on the IQ Panel 5 under Installer Settings. It sends a unique event code when the panel is powered down by Master Code.
How Do I Set Up PowerG Camera Images on the IQ Panel 5?
Change the PowerG camera image settings on the IQ Panel 5 under Installer Settings. Set how many images PIR CAMs upload and which motion events they capture.
How Do I Enable EN Grade 2 Compliance on the IQ Panel 5?
Enable EN Grade 2 on the IQ Panel 5 in Installer Settings. This EN 50131 compliance mode changes entry procedures, trouble handling, and more automatically.
How Do I Change the AC Delay Notification on the IQ Panel 5?
Change the AC Delay Notification on the IQ Panel 5 under Installer Settings. Choose 1 to 60 minutes before an AC power loss reports, with EN Grade 2 enabled.
How Do I Relaunch the Setup Wizard on the IQ Panel 5 System?
Learn how to relaunch the Setup Wizard on the IQ Panel 5. Go to Advanced Settings, enter the Installer Code, touch Setup Wizard, then touch Launch Wizard.
Learn what each sensor group means on the IQ Panel 5, from entry-exit delay and instant perimeter to motion, safety, panic, glass break, and water groups.
Added:
How Do I Adjust Panel Motion Sensitivity on the IQ Panel 5?
Learn how to adjust panel motion sensitivity on the IQ Panel 5. Open Panel Motion Settings, touch Setting, and choose High, Medium, or Low. Low is the default.
Added:
How Do I Turn Off Alarm Photos on the IQ Panel 5 Security System?
Learn how to turn off Alarm Photos on the IQ Panel 5. Go to Installation, Camera Settings, and turn off the Alarm Photos toggle. The camera stops taking them.
Added:
How Do I Use the Activity Monitor on the IQ Panel 5 System?
Learn how to use the Activity Monitor on the IQ Panel 5. Touch Activity Monitor on the Settings page, then choose Quick Access or Deactivate for 24 hour zones.
Added:
What Is IQ Installer and What Can It Do on the IQ Panel 5 System?
The IQ Installer app lets you program the IQ Panel 5 over WIFI from a phone. Learn what it does and how to connect it by scanning the panel's QR code.
Added:
How Do I Enable Power Down Communication on the IQ Panel 5?
Enable Power Down Event Communication on the IQ Panel 5 under Installer Settings. It sends a unique event code when the panel is powered down by Master Code.
Added:
How Do I Set Up PowerG Camera Images on the IQ Panel 5?
Change the PowerG camera image settings on the IQ Panel 5 under Installer Settings. Set how many images PIR CAMs upload and which motion events they capture.
Added:
How Do I Enable EN Grade 2 Compliance on the IQ Panel 5?
Enable EN Grade 2 on the IQ Panel 5 in Installer Settings. This EN 50131 compliance mode changes entry procedures, trouble handling, and more automatically.
Added:
How Do I Change the AC Delay Notification on the IQ Panel 5?
Change the AC Delay Notification on the IQ Panel 5 under Installer Settings. Choose 1 to 60 minutes before an AC power loss reports, with EN Grade 2 enabled.
Added:
How Do I Relaunch the Setup Wizard on the IQ Panel 5 System?
Learn how to relaunch the Setup Wizard on the IQ Panel 5. Go to Advanced Settings, enter the Installer Code, touch Setup Wizard, then touch Launch Wizard.
Added: