Qolsys IQ Hardwire 16-F w/ Large Enclosure Frequently Asked Questions

How Do I Install Multiple Sirens Using the Qolsys IQ Hardwire 16-F?
If the sirens you are adding to a Qolsys IQ Hardwire 16-F exceed 500 mA, then you must add a power supply and relay. Learn how to add multiple sirens to a Qolsys IQ Hardwire 16-F.
Added:

How Can I Tell if My Qolsys IQ Hardwire 16-F Supports EOLR Learning?
Qolsys IQ Hardwire 16-F units made in December of 2019 and beyond support EOLR learning for resistor values from 1k to 10k. Learn how to check if your 16-F supports EOLR learning.
Added:

How Do I Factory Default The Qolsys IQ Hardwire 16-F?
A factory default for the Qolsys IQ Hardwire 16-F should be performed before switching resistor modes or before using the device for the first time. Learn how to default the 16-F.
Added:

How Do I Clear The Memory For The Qolsys IQ Hardwire 16-F?
Clearing the memory for the Qolsys IQ Hardwire 16-F is the same as performing a factory default for the device. Learn how to clear the memory for the IQ Hardwire 16-F.
Added:

How Do I Switch Between Resistor Modes On The Qolsys IQ Hardwire 16-F?
‚ÄčAny Qolsys Hardwire 16-F manufactured in December of 2019 or later supports two (2) resistor modes. Find out how to switch between these resistor modes on the IQ Hardwire 16-F.
Added:

Can I Use the Qolsys IQ Hardwire 16-F to Power My Alarm Panel?
The Qolsys IQ Hardwire 16-F Wired to Wireless Converter needs its own transformer and backup battery. It cannot be used to power a panel. Learn about the Qolsys IQ Hardwire 16-F.
Added:

Do I Need to Enable the Wireless Siren Relay for the Qolsys IQ Hardwire 16-F?
The wireless siren relay for the Qolsys IQ Hardwire 16-F is always enabled when the module is used with a compatible Qolsys IQ Panel 2. Learn about the Qolsys IQ Hardwire 16-F.
Added:

Can the Large Enclosure for the Qolsys IQ Hardwire 16-F be Recessed into a Wall?
The large plastic enclosure for the Qolsys IQ Hardwire 16-F wired to wireless converter module is not designed to be recessed into a wall. Learn about the Qolsys IQ Hardwire 16-F.
Added:

Do I Need to Use End Of Line Resistors With the Qolsys IQ Hardwire 16-F?
All zones for the Qolsys IQ Hardwire 16-F must have an end of line resistor. This includes empty zones that are not actively being used. Learn about the Qolsys IQ Hardwire 16-F.
Added:

Can The Qolsys IQ Hardwire 16-F Support End Of Line Resistor Learning?
Qolsys IQ Hardwire 16-F modules produced in December 2019 and beyond support EOLR learning for resistor values from 1k to 10k. Learn more about the Qolsys IQ Hardwire 16-F.
Added: