Qolsys IQ Panel 2 Plus 319.5 MHz AT&T-LTE 3-1 PowerG Kit

The QOLSYS-1280-PGPK-AT is a 3-1 PowerG Security System Kit that includes all you need to get started with home or business security. You get a 319.5 MHz IQ Panel 2 Plus System with Integrated AT&T LTE, a DSC PG9914 PowerG Motion Sensor, and three (3) DSC PG9303 Door/Window Contacts.

The Qolsys IQ Panel 2 Plus is an excellent system. It offers a gorgeous 7" touchscreen controller, intuitive User Interface, support for up to 128 wireless zones, automatic Bluetooth disarming, partitioning, integrated Z-Wave Plus, the ability to livestream compatible Alarm.com Cameras, and so much more. This is the 319.5 MHz Version that will support Legacy Qolsys and Interlogix Sensors, as well as PowerG Sensors.

All of the PowerG Sensors included with this kit use military grade 128-bit AES encryption for maximum wireless security. This makes them virtually impossible for others to hack or takeover wirelessly. These sensors can communicate with the IQ Panel 2 Plus System from up to 2,000 feet away in open air. The PG9303 Contacts are easy to add to nearly any door or window. The PG9914 Motion offers a coverage area of up to 39 feet and pet immunity of up to 85 pounds.

The system's built-in AT&T LTE Communicator is used for communicating with the Alarm.com servers. This is necessary for receiving monitoring service. The user will also be able to access the Alarm.com Mobile App on their Android or iOS device to control the system remotely. The system also includes a built-in WIFI card for dual-path connectivity. Remember that a Gold Plan or higher is needed to activate this system for monitoring service with Alarm Grid.

Note: The IQ Panel 2 Plus supports up to 152 total Z-Wave devices for local Z-Wave control. There is also a smaller limit for different types of Z-Wave devices. The individual limit for each Z-Wave device type must be manually increased within Installer/Dealer Level Programming. Please also note that Alarm.com has its own smaller limit of 122 total Z-Wave devices for remote operation and use with smart scenes. More information on Alarm.com Z-Wave limits can be found in this FAQ.

The breakdown for the maximum allowed of each device type for local control, is shown in the table below. If you want more information on adjusting IQ2+ Z-Wave device limits, please check this other FAQ.

Note: Please see the following table for the complete device limits for the IQ Panel 2 Plus: