Honeywell Six Motion Detectors Frequently Asked Questions

Why Is My SiX Motion Sensor Flashing When My Alarm System Is Disarmed?
A Honeywell SiXPIR Motion Sensor will flash a red LED light when it detects motion while the device is in its walk test mode. The sensor exits this mode after ten (10) minutes). Learn about walk test mode for a SiXPIR.
Added:

Which Response Types Can I Use With the Honeywell SiXPIR?
The SiXPIR has a limited selection of Response Types available. The available options are all Response Types you might use with a motion sensor. Learn about the SiXPIR.
Added:

What is a Walk Test?
You should perform a Walk Test after installing a new motion sensor to make sure it responds properly and won't cause false alarms. Learn about Walk Tests and how they work.
Added:

Do Alarm Motion Sensors Work Through Glass?
Motion sensors detect changes in infrared (IR) energy. This cannot be done through modern glass, so motion sensors do not sense through glass. Learn more about PIR motion sensors.
Added:

Do Motion Detectors Work Through Windows?
Motion sensors are usually unable to detect motion through glass. The infrared energy needed to activate a motion won't easily pass through glass. Learn more about motion sensors.
Added:

Do Motion Sensors Work in the Dark?
Passive infrared motion sensors work by detecting changes in infrared energy. This allows them to work in the dark, Learn more about motion detection sensors and how they work.
Added:

Which Sensors are Compatible with the Lyric Alarm System?
The Lyric Security System will support encrypted Honeywell SiX Series Sensors that operate at 2.4 GHz. It will also support sensors that operate at 345 MHz. This includes any Honeywell 5800 Series Sensor and any 2GIG Sensor. Find out which sensors are compatible with the Lyric Controller.
Added:

Where Should I Install My Motion Detector?
There are several things you should keep in mind when choosing a location for a motion detector. The ideal location for a motion detector is in the corner of a room and away from any windows. The device should be placed 6 to 8 feet off the ground. Learn more about where to install a motion sensor.
Added:

Can the Lyric's SiXPIR Motion Be Used to Trigger HomeKit Scenes?
It is possible for a SiXPIR motion to activate scenes that have been set up through Apple HomeKit. The Lyric Controller will sync the motion and HomeKit. The SiXPIR will activate an automation on HomeKit, which will then activate the scene. Learn more about using devices to trigger HomeKit scenes.
Added:

Microwave vs. Passive Infrared Motion Detectors
Two of the most common methods for detecting motion are microwave sensing and passive infrared technology. These two methods are both highly effective in detecting motion, but they operate in completely different manners. Learn more about microwave vs. passive infrared motion detection.
Added: