PowerG Key Fobs Frequently Asked Questions

Why Aren't My PowerG Sensors Working After Replacing My IQ Panel 2 Plus?
When replacing an IQ2+, you must follow a special process to sync PowerG Sensors and fix the "Not Networked" condition. Learn to fix the "Not Networked" error for PowerG Sensors.
Added:

How Do I Program a Wireless Zone to a DSC PowerSeries NEO?
Adding a compatible transceiver module will allow you to enroll PowerG Sensors to wireless zones on a PowerSeries NEO System. Learn how to program PowerSeries NEO wireless zones.
Added:

How Do I Enroll a PowerG Sensor to a DSC PowerSeries NEO?
Programming menu 804 lets you auto-enroll sensors to a PowerSeries NEO. The panel must have an added transceiver module. Learn how to add PowerG Sensors to a DSC PowerSeries NEO.
Added:

Does PowerG Prevent RF Jamming?
PowerG Sensors use Frequency Hopping Spread Spectrum (FHSS) to overcome RF jamming attacks. These attacks can disable other sensors. Learn how PowerG Sensors prevent RF jamming.
Added:

How Do I Enroll My PowerG Wireless Sensor?
The enrollment function on a PowerG Sensor is often activated by inserting fresh batteries or by pressing and holding an enrollment button. Learn how to enroll your PowerG Sensor.
Added:

How Do I Factory Default a PowerG Sensor?
By factory defaulting a PowerG Sensor, you can successfully add it to a new system without deleting it from the old one. Learn how to perform a factory reset for a PowerG Sensor.
Added:

Which Keyfobs are Compatible With the Qolsys IQ Panel 2 Plus?
Each version of the Qolsys IQ Panel 2 Plus can support one legacy wireless frequency and the PowerG 915 MHz frequency. Learn about keyfob compatibility for the IQ Panel 2 Plus.
Added:

How Do I Learn the DSC PG9929 Key Fob to the Qolsys IQ Panel 2 Plus?
The DSC PG9929 Key Fob communicates at a frequency of 915 MHz. This makes it compatible with any IQ Panel 2 that has a PowerG Daughtercard. Learn how to program a DSC PG9929.
Added:

How Do I Learn the DSC PG9939 Key Fob to the Qolsys IQ Panel 2 Plus?
The DSC PG9939 is a 4-button key fob that can be auto-enrolled with a Qolsys IQ Panel 2 Plus System. Learn how to enroll this key fob and use it with the IQ Panel 2 Plus.
Added: