Frequently Asked Questions
How Do I Disable Chime on an Interlogix Simon XTi or XTi-5?
The chime function for an Interlogix Simon XTi or XTi-5 System can be enabled or disabled from the main settings menu of the system. Simply click on the gear icon, and then choose "Off" next to the chime option. Learn more about the chime function on the Interlogix Simon XTi and XTi-5 Systems.
What Kind of Wire Do I Need to Use to Install an Interlogix Simon XTi or XTi-5?
The best wire to use when installing an Interlogix Simon XTi or XTi-5 System is an 18-gauge 2-conductor wire. To prevent the need for wire-stripping, a Honeywell LT-Cable can be used. This cable makes it even easier to install these systems. Learn more about wiring a Simon XTi or XTi-5 System.
How Do I Batch Enroll SiX Series Sensors on a Honeywell Lyric Controller?
It is very easy to batch enroll SiX Series Sensors on a Honeywell Lyric Controller. The first step is to put the Lyric Controller into batch enrollment mode. Then power on the SiX Series Sensor. The sensor will be paired automatically. Learn more about the Honeywell SiX Series Sensors.
How Do I Use an Interlogix Simon XTi or XTi-5 to Control a Garage Door?
An Interlogix Simon XTi or XTi-5 can control a garage door if a Z-Wave garage door opener is used. A Z-Wave controller will need to be installed in the panel. This requires adding a cellular communicator for the system. Learn how to set up an XTi or XTi-5 System to control a garage door.
Will an Interlogix Simon XTi or XTi-5 Work w/ a Phone Line?
By default, a Simon XTi or XTi-5 can only connect to monitoring using a phone line. However, we advise using a cellular connection with these systems. In order for these systems to use cellular connectivity, a cellular module must be installed. Learn how to connect an XTi or XTi-5 to the network.
Will Total Connect Work w/ an Interlogix Simon XTi or XTi-5?
Total Connect is not compatible with the Simon XTi or XTi-5 Alarm Systems from Interlogix. The Total Connect service is designed exclusively for use with Honeywell Alarm Systems. However, the Interlogix XTi and XTi-5 Systems can use Alarm.com instead. Learn more about the Simon XTi and XTi-5.
How Long Does a Siren Sound For on an Interlogix Simon XT?
On an Interlogix Simon XT System, the siren will continue to sound until the system is disarmed or when the siren timeout period expires. The system can be disarmed with any valid code. The siren timeout period can be adjusted from system programming. Learn more about the siren on a Simon XT.
How Do I Remove a Z-Wave Device from an Interlogix Simon XTi or XTi-5?
Removing a Z-Wave device from an Interlogix Simon XTi or XTi-5 System is very easy. Doing this will clear the device from the network. It is a good idea to always clear a Z-Wave device before attempting to add it to the network. Learn how to remove a Z-Wave device from a Simon XTi or XTi-5.
Does an Interlogix Simon XTi or XTi-5 Chime When Doors are Opened?
There is a chime feature available on the Simon XTi and XTi Systems. This feature can be enabled or disabled from the main settings menu on these systems. If this feature is enabled, the panel will chime when a monitored door is opened. Learn more about the Simon XTi and XTi-5 chime function.
Will 2GIG Sensors Work On an Interlogix Simon XTi or XTi-5?
The Simon XTi and XTi-5 Systems function with wireless sensors that operate at 319.5 MHz. This is a different frequency than the 345 MHz signal sent by 2GIG Sensors. Because of this, 2GIG Sensors will not work with a Simon XTi or XTi-5. Find out which sensors can work with these systems.
The chime function for an Interlogix Simon XTi or XTi-5 System can be enabled or disabled from the main settings menu of the system. Simply click on the gear icon, and then choose "Off" next to the chime option. Learn more about the chime function on the Interlogix Simon XTi and XTi-5 Systems.
Added:
What Kind of Wire Do I Need to Use to Install an Interlogix Simon XTi or XTi-5?
The best wire to use when installing an Interlogix Simon XTi or XTi-5 System is an 18-gauge 2-conductor wire. To prevent the need for wire-stripping, a Honeywell LT-Cable can be used. This cable makes it even easier to install these systems. Learn more about wiring a Simon XTi or XTi-5 System.
Added:
How Do I Batch Enroll SiX Series Sensors on a Honeywell Lyric Controller?
It is very easy to batch enroll SiX Series Sensors on a Honeywell Lyric Controller. The first step is to put the Lyric Controller into batch enrollment mode. Then power on the SiX Series Sensor. The sensor will be paired automatically. Learn more about the Honeywell SiX Series Sensors.
Added:
How Do I Use an Interlogix Simon XTi or XTi-5 to Control a Garage Door?
An Interlogix Simon XTi or XTi-5 can control a garage door if a Z-Wave garage door opener is used. A Z-Wave controller will need to be installed in the panel. This requires adding a cellular communicator for the system. Learn how to set up an XTi or XTi-5 System to control a garage door.
Added:
Will an Interlogix Simon XTi or XTi-5 Work w/ a Phone Line?
By default, a Simon XTi or XTi-5 can only connect to monitoring using a phone line. However, we advise using a cellular connection with these systems. In order for these systems to use cellular connectivity, a cellular module must be installed. Learn how to connect an XTi or XTi-5 to the network.
Added:
Will Total Connect Work w/ an Interlogix Simon XTi or XTi-5?
Total Connect is not compatible with the Simon XTi or XTi-5 Alarm Systems from Interlogix. The Total Connect service is designed exclusively for use with Honeywell Alarm Systems. However, the Interlogix XTi and XTi-5 Systems can use Alarm.com instead. Learn more about the Simon XTi and XTi-5.
Added:
How Long Does a Siren Sound For on an Interlogix Simon XT?
On an Interlogix Simon XT System, the siren will continue to sound until the system is disarmed or when the siren timeout period expires. The system can be disarmed with any valid code. The siren timeout period can be adjusted from system programming. Learn more about the siren on a Simon XT.
Added:
How Do I Remove a Z-Wave Device from an Interlogix Simon XTi or XTi-5?
Removing a Z-Wave device from an Interlogix Simon XTi or XTi-5 System is very easy. Doing this will clear the device from the network. It is a good idea to always clear a Z-Wave device before attempting to add it to the network. Learn how to remove a Z-Wave device from a Simon XTi or XTi-5.
Added:
Does an Interlogix Simon XTi or XTi-5 Chime When Doors are Opened?
There is a chime feature available on the Simon XTi and XTi Systems. This feature can be enabled or disabled from the main settings menu on these systems. If this feature is enabled, the panel will chime when a monitored door is opened. Learn more about the Simon XTi and XTi-5 chime function.
Added:
Will 2GIG Sensors Work On an Interlogix Simon XTi or XTi-5?
The Simon XTi and XTi-5 Systems function with wireless sensors that operate at 319.5 MHz. This is a different frequency than the 345 MHz signal sent by 2GIG Sensors. Because of this, 2GIG Sensors will not work with a Simon XTi or XTi-5. Find out which sensors can work with these systems.
Added: