The 2GIG TAKE-KIT1 is a wired to wireless conversion kit. The foundation of the kit is the 2GIG TAKE-345 "Super Switch" takeover module w...
The 2GIG TAKE-KIT1 is a wired to wireless conversion kit. The foundation of the kit is the 2GIG TAKE-345 "Super Switch" takeover module which allows an installer to land 8 wired security zones and convert them to 8 wireless zone. The Super Switch is designed to integrate pre-wired sensors with the 2GIG Go!Control wireless alarm system. The control panel has a built-in 345MHz RF receiver. The Super Switch is constantly converting all the signals received on the wired terminals to this 345MHz RF frequency. The Super Switch is included in this kit but is also sold separately. For those looking to tie into the low voltage power supply of an existing wired system you will not require the other parts in this kit.
The TAKE-KIT1 is a bundled package that includes the Altronix 100UL 12VDC auxiliary power supply, Altronix TP1620 16.5VAC 50VA transformer, and an ABS plastic enclosure. The plastic enclosure is suitable for housing 4 of the takeover modules, the power supply and a backup battery. The backup battery is required, however it is not included in the kit! We recommend the Ultratech 1240 12VDC 4AH backup battery. This particular battery should last anywhere between 4 to 24 hours depending on power usage.
This kit is a perfect solution for those looking to cut cost and eliminate battery replacement on peripheral sensors. The 2GIG Go!Control wireless alarm panel is a robust Z-Wave controller (232 Z-wave devices) and advanced security system (48 wireless security zones). This kit is the only way to gain the benefits of the Go!Control panel while maintaing a system built around wired security sensors. The many benefits of the Go!Control panel include firmware updates, advanced automation control (scenes, rules and scheduling), CDMA-compatible (Verizon) cellular communications, and much more!