Honeywell AlarmNet Services Compatibility

Step-by-Step

AlarmNet Services Compatibility
Vista-Low and Mid Series Panels
Total Connect

AlarmNet Control Panel Compatibility
Modes Supported Honeywell/ Private Label 4110 4110DL 4110XM Vista-10/10SE Safewatch Pro Via-30/P/PSE Vista-15 250P1 Vista-20 Vista-20SE SL150 Safewatch 2000 Vista-10P Vista-15P Vista 20P/PS 320P1 Safewatch 3000/EN Vista-21iP Safewatch 4000 LYNX-R/REN LYNXR-I APX32 / APX32EN LYNXR-2 L3000 (LynxPlus)

Keypad Type Full Control (AUI)

Multimode (Email)

GSM, GSMR, i, i-GSM

First Alert
FA100C FA110C FA120C FA140C/ FA142C FA147C FA148C FA160C FA162C FA 130CP FA148CP FA168CPS/FA168CGP ReadyGuard-R/REN ReadyGuard-I ReadyGuard-R2 READYGD3000

ECP

4204

Zone V+ V+ V+

IP/GSM Downloading

Keypad Only

Rev 15 + Rev 15 + Rev 15 +

V+ V+ V+ V+ V+ V+ V+

Rev 15 + Rev 15 + Rev 15 +

Rev 12+

V+ V+

Rev 12+

Rev 4.1+

V+ V- / V+ V- / V+ V- / V+ V- / V+ V- / V+ Rev 2.0+ Rev 5.2+ Rev 5.2+ Rev 5.2+ Rev 5.4+ Rev 2.0+ Rev 3.0+ Rev 3.0+

Rev 4.1+

VRev 17+ Rev 17+ Rev 17+ Rev 17+

Notes: 1. When “Rev.” is referred to, it is referencing the revision of the control panel. 2. To support Total Connect features, your AlarmNet device must be v2.0.7 or later. 3. To support “Full Control” website keypad interface, your control panel must support AUI style keypads AND you must have an available AUI address.

-1-

Tech Support Updated 3/2/10

Step-by-Step

Vista-High Series Panels
Total Connect

AlarmNet Control Panel Compatibility
Modes Supported Honeywell/ Private Label 4120EC/XM 4130/5130 Series 4140XMP/XMPV Vista-40 4140XMPT 4140XMPT2 Vista-50 Vista-50P Vista-50PEN Vista-128B Vista-128BP Vista-128BPE (Rev 4+) Vista-250BP Vista-250BPE (Rev 4+) 5140XM Vista-100 Vista-32FB Vista 128FB Vista-128FBP Vista-128FBP (Rev 4+) Vista-250FBP Vista-250FBP (Rev 4+) 5110XM 5120XM FA2000C FA2100C FA1700C FA1500C FA1600C FA1670C Rev 6.4+ Rev 1.4+ Rev 2.4+ v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 FA1340C FA1660C FA1660CE (Rev 4+)

Keypad Type

Multimode (Email)

GSM, GSMR, i, iGSM First Alert
FA200C FA500C/FA1000C FA1200C/CV FA1220C/CV FA1300C FA1330C v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 v2.2.0 V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ V+ ECP 4204 Zone

IP/GSM Downloading

Keypad Only

Full Control (AUI)

VBPCOMKIT Over ECP VBPCOMKIT Over ECP

VFBPCOMKIT VFBPCOMKIT

Rev 6.4+ Rev 1.4+ Rev 2.4+

VFBPCOMKIT Over ECP VFBPCOMKIT Over ECP

Notes: 1. When “Rev.” is referred to, it is referencing the revision of the control panel. 2. When “vX.X.X” is referred to, it is referencing the revision of the AlarmNet Device. For example, the Vista-40 can use 4204 Emulation mode(s) if the revision of the AlarmNet Device is v2.2.0. 3. To support Total Connect features, your AlarmNet device must be v2.0.7 or later. 4. To support “Full Control” website keypad interface, your control panel must support AUI style keypads AND you must have an available AUI address.

-2-

Tech Support Updated 3/2/10

Step-by-Step
Non Honeywell Panels The 7845GSMR / 7845i-GSM will work in Zone Mode with any manufacturer’s security panel, as well as other products that may or may not be related to the security industry. To use the 7845GSMR / 7845i-GSM on these products you will need to determine if your device will be providing a positive voltage output, negative/pull-to-ground output, or a contact closure (Normal Open/Normal Closed). Your next step will be to program your 7845GSMR / 7845i-GSM zone inputs for the correct trigger type: V+, V-, or EOLR. NOTE: If the Total Connect Multimode (Email) feature is enabled when using Zone Mode, only device supervision messages will be sent to the AlarmNet Network Control Center, ALL OTHER MESSAGES will be sent as email messages via Total Connect and will NOT be sent to central station. This means that all zone inputs will ONLY trip email messages, when Total Connect Multimode is enabled in zone mode.

-3-

Tech Support Updated 3/2/10