Qolsys TSB #240131 - Qolsys IQ Panel 4/IQ4 Hub/IQ4 NS Firmware Update - 4.4.2

TSB #:
240131



DATE:
01/31/24

RE:
IQ PANEL 4/IQ4 HUB/IQ4 NS - 4.4.2 SOFTWARE UPDATE

RELEASE NOTES & UPDATE INSTRUCTIONS

Release Notes:

Fixes/Improvements:

•
Fixed an issue where certain hardwire panic buttons using a PG4945 transmitter, and where programmed as
Auxiliary Pendant, Group 2, could generate a daily alarm signal.

•
Text to speech (TTS) changes in Spanish (Espa
ñ
ol
,
Espa
ñ
a
).

•
Compatibility for PG8935 firmware version 6.70. Addresses an issue that could cause a false alarm.

•
Keyswitch option removed when language changed to Italian (Italiano, Italia).

•
Fixed an issue where 3g enabled IQ4 Hub’s and IQ Panel 4’s (Latin America) could show “No Signal” for the 3g
network despite being connected.

•
Corrected an issue that prevented editing of sensors via the panel UI.

•
Various security fixes & improvements.

Update Instructions:

Compatibility Note: Your IQ Panel must be on software version 4.3.0 or higher and connected to Wi-Fi to install
this update wirelessly. Panels running 4.0.0, 4.0.1 or 4.1.0 must be updated to 4.1.1 first, which then can be
updated directly to 4.2.0 or 4.2.1. Once updated to 4.2.0 or 4.2.1 they can be updated directly to 4.3.0 and then
4.4.2.

1- Swipe down from the top of the screen and touch “Settings"

2- Touch “Advanced Settings”

3- Enter a valid installer code (default is 1111)

4- Touch "Upgrade Software"

5 -Touch “Patch Tag” and enter the patch
iqpanel4.4.2
then touch OK

6- Touch "Upgrade Using Network" (panel must be connected to Wi-Fi).
 
Update will download and install

7- Once complete touch "OK" to reboot the panel.
 
DO NOT TOUCH THE SCREEN.

 
The update process will take
approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.
TECHNICAL SERVICE BULLETIN
IQ PANEL 4/IQ4 HUB/IQ4 NS - 4.4.2 SOFTWARE UPDATE - RELEASE NOTES