Cellular Alarm Communicators Frequently Asked Questions
How Do I Connect a TG-1 Express to my Older Legacy Panel?
The Telguard TG-1 Express mounts near the panel. It connects to the power and phone terminals of the panel. Learn how to connect the TG-1 Express to a legacy panel.
How Do I Upgrade My 2GIG GC3 to an LTE Communicator?
To upgrade the communicator on the 2GIG GC3, choose "Cell Radio Swap" from Settings. Tap "Begin", and follow the on-screen instructions. Learn to update the GC3 communicator.
How Do I Upgrade My 2GIG GC2 to an LTE Communicator?
To upgrade the 2GIG GC2 to an LTE communicator, you must remove the old communicator. Then install the new one, and register it. Read on to learn about upgrading the 2GIG GC2.
How Do I Connect an iPhone to an Interlogix Simon XTi or XTi-5?
An iPhone can connect with an Interlogix Simon XTi or XTi-5 using the Alarm.com Mobile App. This app is available for free download from the App Store. The XTi or XTi-5 System will need active cellular service to work with Alarm.com. Learn how to use an iPhone with the Simon XTi or XTi-5.
How Do I Remove a Z-Wave Device from an Interlogix Simon XTi or XTi-5?
Removing a Z-Wave device from an Interlogix Simon XTi or XTi-5 System is very easy. Doing this will clear the device from the network. It is a good idea to always clear a Z-Wave device before attempting to add it to the network. Learn how to remove a Z-Wave device from a Simon XTi or XTi-5.
How Do I Add an Interlogix Simon XTi or XTi-5 to My Local WIFI?
There is currently no way to add an Interlogix Simon XTi or XTi-5 to a WIFI network. Interlogix does not make a WIFI card for these panels. The Simon XTi and XTi-5 instead rely upon cellular communication or a phone line to remain connected to the network. Learn more about the Simon XTi and XTi-5.
How Do I Use an Interlogix Simon XTi or XTi-5 to Control a Garage Door?
An Interlogix Simon XTi or XTi-5 can control a garage door if a Z-Wave garage door opener is used. A Z-Wave controller will need to be installed in the panel. This requires adding a cellular communicator for the system. Learn how to set up an XTi or XTi-5 System to control a garage door.
Will Total Connect Work w/ an Interlogix Simon XTi or XTi-5?
Total Connect is not compatible with the Simon XTi or XTi-5 Alarm Systems from Interlogix. The Total Connect service is designed exclusively for use with Honeywell Alarm Systems. However, the Interlogix XTi and XTi-5 Systems can use Alarm.com instead. Learn more about the Simon XTi and XTi-5.
What Happens to an Interlogix Simon XTi or XTi-5 When Internet Goes Down?
Since an Interlogix Simon XTi or XTi-5 System cannot connect to the internet, having the internet go down will not affect one of these systems. Instead of using the internet, these systems use a phone line or a cellular connection to communicate. Learn more about the Simon XTi and XTi-5 Systems.
How Do I Connect My Interlogix Simon XTi or XTi-5 to WIFI?
There is no possible way to connect an Interlogix Simon XTi or XTi-5 to WIFI. Interlogix has not released a compatible WIFI card for these systems. They can only use a cellular connection or a phone line connection. We recommend using cellular. Learn more about the Simon XTi and XTi-5 Systems.
The Telguard TG-1 Express mounts near the panel. It connects to the power and phone terminals of the panel. Learn how to connect the TG-1 Express to a legacy panel.
Added:
How Do I Upgrade My 2GIG GC3 to an LTE Communicator?
To upgrade the communicator on the 2GIG GC3, choose "Cell Radio Swap" from Settings. Tap "Begin", and follow the on-screen instructions. Learn to update the GC3 communicator.
Added:
How Do I Upgrade My 2GIG GC2 to an LTE Communicator?
To upgrade the 2GIG GC2 to an LTE communicator, you must remove the old communicator. Then install the new one, and register it. Read on to learn about upgrading the 2GIG GC2.
Added:
How Do I Connect an iPhone to an Interlogix Simon XTi or XTi-5?
An iPhone can connect with an Interlogix Simon XTi or XTi-5 using the Alarm.com Mobile App. This app is available for free download from the App Store. The XTi or XTi-5 System will need active cellular service to work with Alarm.com. Learn how to use an iPhone with the Simon XTi or XTi-5.
Added:
How Do I Remove a Z-Wave Device from an Interlogix Simon XTi or XTi-5?
Removing a Z-Wave device from an Interlogix Simon XTi or XTi-5 System is very easy. Doing this will clear the device from the network. It is a good idea to always clear a Z-Wave device before attempting to add it to the network. Learn how to remove a Z-Wave device from a Simon XTi or XTi-5.
Added:
How Do I Add an Interlogix Simon XTi or XTi-5 to My Local WIFI?
There is currently no way to add an Interlogix Simon XTi or XTi-5 to a WIFI network. Interlogix does not make a WIFI card for these panels. The Simon XTi and XTi-5 instead rely upon cellular communication or a phone line to remain connected to the network. Learn more about the Simon XTi and XTi-5.
Added:
How Do I Use an Interlogix Simon XTi or XTi-5 to Control a Garage Door?
An Interlogix Simon XTi or XTi-5 can control a garage door if a Z-Wave garage door opener is used. A Z-Wave controller will need to be installed in the panel. This requires adding a cellular communicator for the system. Learn how to set up an XTi or XTi-5 System to control a garage door.
Added:
Will Total Connect Work w/ an Interlogix Simon XTi or XTi-5?
Total Connect is not compatible with the Simon XTi or XTi-5 Alarm Systems from Interlogix. The Total Connect service is designed exclusively for use with Honeywell Alarm Systems. However, the Interlogix XTi and XTi-5 Systems can use Alarm.com instead. Learn more about the Simon XTi and XTi-5.
Added:
What Happens to an Interlogix Simon XTi or XTi-5 When Internet Goes Down?
Since an Interlogix Simon XTi or XTi-5 System cannot connect to the internet, having the internet go down will not affect one of these systems. Instead of using the internet, these systems use a phone line or a cellular connection to communicate. Learn more about the Simon XTi and XTi-5 Systems.
Added:
How Do I Connect My Interlogix Simon XTi or XTi-5 to WIFI?
There is no possible way to connect an Interlogix Simon XTi or XTi-5 to WIFI. Interlogix has not released a compatible WIFI card for these systems. They can only use a cellular connection or a phone line connection. We recommend using cellular. Learn more about the Simon XTi and XTi-5 Systems.
Added: