Home Security Systems Frequently Asked Questions

Can I Install a DSC Impassa Myself and Still Get Monitoring?
A DSC Impassa can certainly be self-installed. As long as it is working properly, a DIY monitoring company won't care who installed it. Find out more about the DSC Impassa.
Added:

How Do I Add a DSC Impassa to My Local WIFI?
A DSC Impassa cannot connect with a WIFI network. Instead, we recommend using a cellular connection with the system. Learn about the possible communication paths for the Impassa.
Added:

How Do I Connect a TG-1 Express to my Older Legacy Panel?
The Telguard TG-1 Express mounts near the panel. It connects to the power and phone terminals of the panel. Learn how to connect the TG-1 Express to a legacy panel.
Added:

How Do I Add a Wireless Zone to a DSC Impassa?
A wireless zone is added to a DSC Impassa by putting the panel into enrollment mode and then activating the sensor. Then configure the settings. Learn how to set up a DSC Impassa.
Added:

How Do I Change the Date or Time on a DSC Impassa?
The DSC Impassa features a special menu for setting the date and time. This menu can be accessed from the main screen. Find out how to change the Impassa date and time.
Added:

How Do I Add Additional User Codes to a DSC Impassa?
New user codes can be added to a DSC Impassa using the system's Master Code. The system will support up to 16 user codes. Learn how to add user codes to a DSC Impassa.
Added:

Can I Use a DSC Impassa w/o Monitoring?
A DSC Impassa System can technically be used without monitoring service. But its functionality will be extremely limited. Find out why monitoring is important for a DSC Impassa.
Added:

Can a DSC Impassa Do Home Automation w/o Monitoring?
It is impossible to do home automation on a DSC Impassa without monitoring service. Z-Wave control is built into the cellular communicator. Learn more about home automation.
Added:

Will Total Connect Work w/ a DSC Impassa?
A DSC Impassa cannot be used with Total Connect. The Total Connect service is for Honeywell Panels only. But the DSC Impassa can access Alarm.com. Learn more about Alarm.com.
Added:

Will Interlogix/GE Sensors Work on a DSC Impassa?
The only way to use Interlogix/GE Sensors with an Impassa is to use a wireless converter. This will translate the 319.5 MHz signal into a 433 MHz signal. Learn more about sensors.
Added: