Plug-in Modules Frequently Asked Questions

How Do I Remove a Z-Wave Device from a 2GIG Edge?
Clearing a Z-Wave device is usually done before adding it to a network, or if you no longer intend on using that Z-Wave device. Learn to clear a Z-Wave device from the 2GIG Edge.
Added:

How Do I Add a Z-Wave Device to a 2GIG Edge?
A Z-Wave device paired with the 2GIG Edge can be operated from the panel, or remotely from Alarm.com if the system is monitored. Learn to pair a Z-Wave device with the 2GIG Edge.
Added:

Is a Qolsys IQ Panel 2 Z-Wave Compatible?
The IQ Panel 2 includes an integrated Z-Wave Plus controller for operating Z-Wave home automation devices. Up to 119 different Z-Wave devices can be programmed. Z-Wave devices can be controlled from the panel or from Alarm.com. Learn more about the Qolsys IQ Panel 2 and Z-Wave automation.
Added:

How Do I Set Up Automation on My Interlogix Simon XT?
To set up home automation on a Simon XT, the system must have a Z-Wave controller. Automation is added to the Simon XT using a cellular communication module. Once the module has been added, Z-Wave devices are set up with the system through programming. Learn how to use automation with a Simon XT.
Added:

How Do I Turn Off My Lights when I Arm Away on My Honeywell Alarm System?
In order to automatically turn off your lights when you set your security panel to Arm Away, you will need to set up an automated Z-Wave scene with the panel.
Added:

How Do I Remove A Z-Wave Device From A 2GIG GC3?
Z-Wave devices are removed from a 2GIG GC3 system through the Smart Home Settings menu. You must put the GC3 into exclusion mode to remove Z-Wave devices.
Added:

Lyric Gateway Vs. Honeywell L7000
Comparison Chart
Added: