Wired Motion Detecting Sensors Frequently Asked Questions

How Do I Program a Hardwired Zone to a DSC PowerSeries NEO?
A DSC PowerSeries NEO Panel will have on-board zones for adding hardwired sensors. A wired expansion module can also be used. Learn how to add a wired zone to the NEO.
Added:

How Do I Program a Hardwired Zone to a DSC PowerSeries NEO?
A DSC PowerSeries NEO Panel will have on-board zones for adding hardwired sensors. A wired expansion module can also be used. Learn how to add a wired zone to the NEO.
Added:

Are There Compatible Motion Sensors for the Honeywell 6150?
The Honeywell 6150 is not a security system. It is a keypad. It cannot directly interface with a motion sensor. But the systems it is used with can. Learn about the 6150.
Added:

Are There Compatible Motion Sensors for the Honeywell 6150?
The Honeywell 6150 is not a security system. It is a keypad. It cannot directly interface with a motion sensor. But the systems it is used with can. Learn about the 6150.
Added:

Honeywell IS2535 vs Honeywell IS3035
Two of the most popular hardwired motion sensors from Honeywell are the IS2535 and the IS3035. The IS3035 is newer and more powerful. Learn about these two motion sensors.
Added:

What Is The Best Indoor, Wired PIR Motion Sensor?
There are many hardwired PIR motion sensors. The best one depends on your needs. It can vary greatly between different setups. Find out which motion sensor is best for your needs.
Added:

What Is a Motion Sensor?
Most alarm systems will have at least one motion sensor installed. These devices are great for detecting unwanted break-ins. Find out what motion sensors are and how they work.
Added:

How are Motion Detectors Wired to a Panel?
A hardwired motion detector will normally use a 4-wire connection with the panel. Two wires will transmit data, and the other two transmit power. Learn about motion sensors.
Added:

How Are Motion Sensors Wired?
The typical hardwired motion sensor will use a 4-wire connection, with two wires for data and two wires for power. Most use Normally Closed wiring. Learn about motion sensors.
Added:

What is a Walk Test?
You should perform a Walk Test after installing a new motion sensor to make sure it responds properly and won't cause false alarms. Learn about Walk Tests and how they work.
Added: