Do I Need Internet To Use A 2Gig GoControl?

No, the 2Gig GoControl wireless alarm panel and home management system offers several options to communicate.

The basic landline - can be the primary communication or backup communicator when used with a cell radio. Connection via a landline provides central station monitoring. A 2Gig Potts Module provides full line seizure when properly connected to a RJ31X jack and has terminals for a buttset connection.

Go!Bridge - is a broadband communicator. The Go!Bridge requires a 2Gig XCVR2-345 transceiver. Users will be able to receive OTA (over the air) updates. Connection via Go!Bridge provides central station monitoring and can be used as a secondary path to Alarm.com.

Cellular Telephone Modules - gsm cell alarm communicators eliminates the need for traditional landlines and is the most reliable form of communication available. 2Gig offers cellular modules that works on Verizon, AT&T, and T-Mobile Networks for US customers. Rogers Network for Canada and Movistar Mexico for Mexico customers. Telguard cell modules work on AT&T Network and is available for US and Canada customers. Connection via gsm cell modules allows users to receive OTA updates and connect to Alarm.com in addition to central station monitoring. All the cell modules plug directly into the 2Gig control panel and ships with a designated sim card that requires activation from an Alarm.com dealer. Cell radio modules come with an external in wall 10 inch antenna. If additional signal strength is needed, an optional external attic mount antenna with a 10 foot cable is available for purchase.

The 2Gig GoControl alarm system provides 48 wireless zones, 2 hardwired zones and 32 user codes. The GoControl panel also has a built in Z-Wave module that supports up to 232 Z-Wave devices that can be controlled directly from the panel or from any computer or smartphone when connected to Alarm.com.