Does The L5200 And L7000 Chime When A Door's Opened?
When the chime feature is activated, three beeps or a selected programmed chime will sound at the control panel whenever a protected perimeter door or window is opened and if programmed, the zone voice descriptor will be announced.
The chime mode can be changed only when the system is disarmed. Additionally, the faulted zone information will be displayed on the Security Screen. Selecting the "Zones" icon displays the open protection zones.
To activate the chime mode, make sure the system in the disarmed state and select the "Settings" icon found on the second page of the Security Screen.
Select the "Chime" icon found on the bottom right. The system toggles between off and on. When selected on, the button turns green and the chime mode will be active.
Press save to save the setting.
Press the return icon to return to the Settings screen.
With the panel still in the unarmed state, select the "Zones" icon
from Security Screen.
Press "Select All" and scroll through the options until "Select Chime" appears.
Select the zone from the displayed list and then select the "Chime" button to scroll through the available chimes. Each chime sounds when selected for preview.
Once all zones have been "chimed", press the save button to save the settings.
Enter the master code on the displayed keypad and the system will return to the security screen.
Did you find this answer useful?
We offer alarm monitoring as low as $10 / monthClick Here to Learn More
- Answered By
- Connie Michael