How Do I Factory Default My Yale Z-Wave Lock?
You can factory default your Yale Z-Wave Lock by removing the batteries and the inside escutcheon. This will allow you to access the reset button that is found by the PCB cable connector. Press and hold the reset button. Keep the button held down as you reapply the batteries to factory reset.
A few things will happen if you perform a factory default on a Yale Z-Wave Lock. First, the Master PIN Code will be reset back to its default of 12345678. Second, any added codes will be deleted. Third, any Z-Wave settings will be reset. This means that the device will need to be re-enrolled with the Z-Wave Hub. You should clear the device from the network before attempting to enroll. A scenario where a default might be recommended is when the lock will be added to a Z-Wave network, but was previously used by itself with only local user codes.
Please note that the process outlined below is the general process for factory resetting Yale Z-Wave Locks. It's possible that some models may follow a different process. Also keep in mind that some locks may respond differently to a factory reset. You should check the installation manual for your Yale Z-Wave Lock for more information.
If you want to factory default your Yale Z-Wave Lock, complete the following steps:
1. Prepare the lock. Remove the battery cover from the lock. Then remove the batteries and the inside escutcheon so that you can you can access the reset button.
2. Press the reset button. Press the reset button, and keep it held down. You will keep the button held down as you reapply power.
3. Reapply power. With the reset button held down, reinsert the battery to reapply power. You can then release the reset button. This will reset the lock. You can confirm the reset later by checking to see if 12345678 works as the default PIN.
4. Reassemble the lock. Reapply the inside escutcheon and the battery cover. Make sure that all the connections are nice and sealed. You can then re-enroll the lock and add any needed codes. Remember, performing a factory reset will have the lock behave as if it were powered on for the first time ever.
Did you find this answer useful?
We offer alarm monitoring as low as $10 / monthClick Here to Learn More