How Do I Include My August Smart Lock Pro With My Honeywell Lyric?

You can include your August Smart Lock Pro with your Honeywell Lyric by using the August Home App on your Android or iOS device. This involves putting the August Smart Lock Pro into its Z-Wave inclusion mode using the app and then activating the Z-Wave inclusion function on the Lyric Panel.

The August Smart Lock Pro is smart enough to know whether or not it is currently paired with a Z-Wave network. Therefore, there is no reason to perform a device exclusion prior to inclusion. You can just go ahead and include it with your Lyric System. All configuration for the lock is done through the August Home App, which can be downloaded for free from the Google Play Store or Apple App Store.

For this FAQ, we will assume that initial setup is complete and that you are merely trying to pair the device with your Lyric System. Keep in mind that it is best practice to have the lock in close proximity to the panel during the pairing process. If the lock is too far away from the panel, then the Z-Wave signals might not reach the intended destination.

Complete the following steps to pair an August Smart Lock Pro with a Honeywell Lyric Alarm System:

1. Open the August App. Open the August Home App on your Android or iOS device. You will use this app to put the lock into its Z-Wave pairing mode.

2. Navigate lock settings. Find the lock that you want to work with. Once you have navigated to the lock, click the settings icon (the gear) in the bottom-right.

From there, you want to choose Lock Settings.

Then Z-Wave Settings.

Then press the blue "Add to Z-Wave Network" button at the bottom.

You will then be prompted to put your Z-Wave hub (the Lyric) into its Z-Wave inclusion mode. You can now turn your attention to the Lyric System.

3. Activate Lyric Z-Wave inclusion. From the main screen of your Lyric, choose Automation. Then click the down arrow on the right side of the screen. Then choose Tools, followed by Include Devices. The Lyric will enter its inclusion mode.

4. Pair the device. With the Lyric in its inclusion mode, press the "My Hub is in Inclusion Mode" button on your Android or iOS device.

You can finish setting up the lock on the Lyric System. You may get a warning on the app that states that your Z-Wave hub is using the S0 security protocol. This is normal, and you can just click the Got It button to ignore. You should then receive notification that your lock has been added successfully.