2GIG GC3e AT&T-LTE 3-1 Kit Frequently Asked Questions

How Do I Use a 2GIG XCVR3-GC3 and Image Sensors with a GC3e?
The 2GIG XCVR3-GC3 900 MHz Transceiver Module allows the 2GIG GC3e panel to support the IMAGE2 and IMAGE3 Sensors. It can support up to ten (10) of these. Learn about the XCVR3-GC3.
Added:

How Do I Set Up a Cellular Communicator in a 2GIG GC3e?
Adding a cellular communicator to your 2GIG GC3e will allow you to activate the system for monitoring service. Learn how to add a cellular communicator to your 2GIG GC3e System.
Added:

How Do I Connect a 2GIG GC3e to WIFI?
The 2GIG GC3e has a built-in WIFI card for connecting to a WIFI network. The GC3e must still be set up with a cellular radio for connectivity with Alarm.com. Learn about the GC3e.
Added:

How Do I Program a Key Fob Into a 2GIG GC3e?
The 2GIG GC3e has a Key Fobs Menu for enrolling new key fob devices. Up to 32 key fobs can be enrolled with the panel. Learn how to pair a key fob with a 2GIG GC3e.
Added:

How Do I Add or Change User Codes on a 2GIG GC3e?
The 2GIG GC3e Security System allows you to program up to 100 different user codes. A duress code can also be programmed. Learn how to add or change GC3e user codes.
Added:

How Do I Pair a Z-Wave Device to the 2GIG GC3e?
The 2GIG GC3e has an integrated Z-Wave Plus controller. This allows you to build an automation network around the system. Learn how to pair a Z-Wave device with a 2GIG GC3e.
Added:

How Do I Program a Zone to a 2GIG GC3e?
The 2GIG GC3e allows you to auto-enroll compatible wireless sensors. This is a very important part of setting up a new system. Learn how to program 2GIG GC3e zones.
Added:

How Do I Power On the 2GIG GC3e?
The 2GIG GC3e receives primary power from a plug-in 14VDC 1.7A transformer. A battery pack serves as the backup power supply. Learn how to power a 2GIG GC3e System.
Added: