Honeywell Lyric Security System Frequently Asked Questions

What is the Easiest Way to Change Chime Tones on the Lyric?
In Lyric Zones, use the toggle button in the bottom-right to Select Chime and show every zone with a Chime. You can toggle the selections. Learn to change Lyric Panel Chime tones.
Added:

How Can I Tell If My Lyric Panel Or Its Battery Is Bad?
The best way to diagnose a bad battery for a Lyric System is by using a voltmeter. Learn how you can determine whether your Lyric Panel or its backup battery needs to be replaced.
Added:

Why Does My Panel Show CO or Fire Trouble on an FF345 Zone?
FF345 units with a date code of 09/2020 or later are known to cause Fire or CO Sensor Trouble on Honeywell Systems after a Fire or CO Alarm is cleared. Learn about this issue.
Added:

Why Did I Hear My Lyric Alarm System Speak Unexpectedly?
If you enable the Lyric Voice Command feature and never properly calibrate it, then you may hear the system suddenly speak for seemingly no reason. Learn about this feature.
Added:

How Do I Change the Master Code On a Honeywell Lyric Controller?
Changing the Master Code on Lyric requires knowing the current Master Code. You can also reset the Master Code using the Installer Code. Learn to change the Lyric Master Code.
Added:

What is the Lyric Lock Feature for the Honeywell Lyric Controller?
If Lyric Lock is enabled for your Lyric System, then you must have your alarm company provide you with a generated code to enter programming. Learn about the Lyric Lock feature.
Added:

Is the Honeywell Lyric Compatible w/ Alexa?
If you have Total Connect 2.0, then you can set up Amazon Alexa to control your Lyric System. Learn how the Honeywell Lyric Controller is compatible with Amazon Alexa.
Added:

What Is The "Keypad Tamper Lockout" Feature On a Lyric Security System?
The Lyric is designed to stop "brute force" entries into the system with its Keypad Tamper Lockout feature. Learn about this feature and how it affects your Lyric System.
Added:

Will The Lyric Controller Work With Wired Honeywell Sensors?
The only way to make a Lyric Controller support wired sensors is to use a wired to wireless converter. A good device for this is the Honeywell 5800C2W. Learn about wired sensors.
Added:

Can I Use a Honeywell IP Device With MAC Filtering?
MAC filtering is a security feature on many routers. You must add the MAC address for your IP device to the access list. Learn how to use a Honeywell IP Device with MAC filtering.
Added: