Honeywell VISTA-15P Frequently Asked Questions

How Do I Use the Chime By Zone Function for a Honeywell VISTA P-Series Panel?
Using the Chime By Zone function requires setting up a Zone List in *81 and then configuring the feature in *26. An Alpha Keypad is needed. Learn to use Chime By Zone on a VISTA.
Added:

Is Honeywell Compatible w/ ADEMCO?
Honeywell used to be known as ADEMCO, and you can use most ADEMCO products with compatible Honeywell Alarm Systems. Learn about Honeywell and ADEMCO security products.
Added:

What is the Difference Between Honeywell and ADEMCO?
Honeywell and ADEMCO both largely refer to the same equipment. ADEMCO was the original name for Honeywell, which later became Resideo. Learn about Honeywell and ADEMCO.
Added:

How Do I Turn Off Arm-Confirm for a Honeywell VISTA System?
By turning off Arm-Confirm, your system's siren will not produce a loud tone whenever you Arm Away using a keypad or key fob. Learn how to turn off Arm-Confirm for a VISTA System.
Added:

Why Am I Getting a "Check 100" On My VISTA P-Series Panel?
​A Check 100 error on a VISTA System means that the system is trying to supervise a wireless receiver, but it is unable to find one. Learn about the Check 100 error.
Added:

Will Alarm.Com Work on a Lyric Gateway?
The Lyric Gateway is a Honeywell Security System that is used with Total Connect 2.0. You cannot use it with the Alarm.com service. Find out why the Gateway doesn't work with ADC.
Added:

How Do I Upgrade a Honeywell VISTA P-Series System to Use LTE?
Adding an LTE communicator to a VISTA P-Series Panel will allow it to connect with an LTE network. But certain firmware requirements must be met for TC2. Learn about VISTA Panels.
Added:

How Do I Install a Honeywell 7847i for a VISTA P-Series Panel?
The Honeywell 7847i uses a 4-wire connection, and it receives all its power from the panel. Find out how to connect a Honeywell 7847i to a Honeywell VISTA P-Series Panel.
Added:

How Do I Remove an iControl From a Spectrum Security System?
Spectrum disbanded their alarm monitoring business in December 2019. Learn how to remove an iControl device from a Spectrum System so that you can use it with a different company.
Added:

How Does RF Supervision Work On a Honeywell VISTA P-Series System?
If you have a wireless receiver and wireless sensors for a VISTA System, then you will want to know about RF supervision. Learn about RF supervision on a Honeywell VISTA Panel.
Added: