Qolsys IQ Panel 4 Verizon LTE, Interlogix/GE Compatible Frequently Asked Questions
How Do I Test the PGP9986 Water Tile?
You can test the PowerG signal level using the IQ4 panel. Perform a functional test using a bit of water and/or a cold environment. Keep reading to learn more.
How Do I Factory Default The DSC PGP9986 Water Tile?
To set a Water Tile to default, press the button until the LED lights, release, then press again. Three flashes of the red LED indicate default. Click for more.
How Do I Install the PowerG+ Water Tile (PGP9986)?
Choose your scenario, you can use the water tile alone or with a probe/cable. Mount the device then enroll into the alarm panel. Click here to learn more.
How Do I Clear a Trouble on a Qolsys IQ Panel 4?
To clear a trouble condition on an IQ Panel 4, correct the cause of the trouble then go to messages and acknowledge the trouble alert. Click here for details.
How Do I Setup the ADC-VDB780B Wireless Video Doorbell?
There are multiple ways to configure the Alarm.com ADC-VDB780B. A gateway is required to connect the doorbell to WIFI and Alarm.com. Click here to learn how.
How Do I Disable Dual-Band WIFI On a Qolsys IQ Panel 4?
Although dual-band WIFI is usually a good thing, it may be advantageous to disable it. Disable it in Advanced WIFI settings. Click here and find out how today!
How Can I Have Remote Access To My Qolsys IQ Panel 4?
To access your Qolsys IQ Panel 4 remotely you need a monitoring plan. Depending on the plan you choose, you'll get access to Alarm.com. Click here for details.
How Do I Add a Zigbee Sensor to a Qolsys IQ Panel 4?
First, install the Zigbee card. Then, go to Auto-Learn and remove the battery tab from the sensor. Complete zone programming and save. Click here for tutorial.
How Do I Install The Qolsys IQ Panel 4?
Determine whether you will wall mount or desk mount your system, and where you want the panel located. Then program and register. Click here for full details.
What Is A Sensor Group in Zones on a Qolsys IQ Panel 4?
The Sensor Group setting tells the panel how the zone should be treated. We'll go through each option here, and provide a description. Click for details.
You can test the PowerG signal level using the IQ4 panel. Perform a functional test using a bit of water and/or a cold environment. Keep reading to learn more.
Added:
How Do I Factory Default The DSC PGP9986 Water Tile?
To set a Water Tile to default, press the button until the LED lights, release, then press again. Three flashes of the red LED indicate default. Click for more.
Added:
How Do I Install the PowerG+ Water Tile (PGP9986)?
Choose your scenario, you can use the water tile alone or with a probe/cable. Mount the device then enroll into the alarm panel. Click here to learn more.
Added:
How Do I Clear a Trouble on a Qolsys IQ Panel 4?
To clear a trouble condition on an IQ Panel 4, correct the cause of the trouble then go to messages and acknowledge the trouble alert. Click here for details.
Added:
How Do I Setup the ADC-VDB780B Wireless Video Doorbell?
There are multiple ways to configure the Alarm.com ADC-VDB780B. A gateway is required to connect the doorbell to WIFI and Alarm.com. Click here to learn how.
Added:
How Do I Disable Dual-Band WIFI On a Qolsys IQ Panel 4?
Although dual-band WIFI is usually a good thing, it may be advantageous to disable it. Disable it in Advanced WIFI settings. Click here and find out how today!
Added:
How Can I Have Remote Access To My Qolsys IQ Panel 4?
To access your Qolsys IQ Panel 4 remotely you need a monitoring plan. Depending on the plan you choose, you'll get access to Alarm.com. Click here for details.
Added:
How Do I Add a Zigbee Sensor to a Qolsys IQ Panel 4?
First, install the Zigbee card. Then, go to Auto-Learn and remove the battery tab from the sensor. Complete zone programming and save. Click here for tutorial.
Added:
How Do I Install The Qolsys IQ Panel 4?
Determine whether you will wall mount or desk mount your system, and where you want the panel located. Then program and register. Click here for full details.
Added:
What Is A Sensor Group in Zones on a Qolsys IQ Panel 4?
The Sensor Group setting tells the panel how the zone should be treated. We'll go through each option here, and provide a description. Click for details.
Added: