The 2GIG-TAKE-ENCL is a hardwire-to-wireless takeover module enclosure. If you need to convert hardwired zones to 2GIG's 345 MHz frequency, this kit will house up to three (3) 2GIG TAKE-345 or 2GIG TAKE1e-345 "Super Switch" modules. This kit includes an ABS Plastic Enclosure, a power supply, and an AC transformer. It will provide a secure enclosure for your wired to wireless converters and the included power supply board, with additional space for a backup battery (not included).
Important: The 2GIG-TAKE-345 or 2GIG TAKE1e-345 is NOT INCLUDED in this enclosure kit. The takeover modules are sold separately.
This kit is ideal if you plan on adding up to three (3) 2GIG "Super Switch" modules to a system. These modules are perfect for converting hardwired zones into wireless zones, making it simple to keep using existing hardwired zones. All while gaining the features of a new wireless touchscreen alarm panel. This enclosure will allow you to house up to three (3) modules in one secure location. Mounting hardware for the enclosure kit is included.
If you do not currently have any "Super Switch" modules but need to purchase one, you may want to look into the 2GIG TAKE-KIT1 wired-to-wireless conversion kit. The TAKE-KIT1 is a bundled package that includes an ABS Plastic Enclosure, a power supply board, an AC transformer, and (1) 2GIG TAKE-345 "Super Switch" takeover module. This is the non-encrypted version of the Super Switch. If you prefer to use encryption, then purchase the 2GIG-TAKE-ENCL and then add the encrypted takeover module. The plastic enclosure included in the 2GIG TAKE-KIT1 kit can also house a total of three (3) 2GIG TAKE-345 modules.
The 2GIG 345 MHz wireless signal is compatible with a number of different panels. The 2GIG GC2, GC2e, GC3, GC3e, and the 2GIG Edge. The Honeywell Lyric, the Honeywell Home/Resideo PROA7PLUS, PROA7PLUSC, PROA7, and the PROA7C (to work with these panels, you must have the PROTAKEOVER module installed with the dial set for 2GIG.) And the Qolsys IQ Panel 2 Plus 345 MHz version and the IQ Panel 4 345 MHz version.
The 2GIG-TAKE-ENCL will require that you purchase the "Super Switch" modules separately. You will also need to purchase a backup battery. One (1) 12 V, 1.4 Ah (or larger) rechargeable Gel-Type or Sealed Lead Acid Battery is required. The battery can be housed inside the enclosure along with the modules and power supply. We recommend the UltraTech IM-1250F1, it is a 4.5 AH battery that measures 4.21" H (w/terminals) x 3.54" W x 2.76" D (107mm x 90mm x 70mm).
The battery requires a positive and a negative wire which will connect to the power supply board. Use F1-style connectors at the battery end for the most secure connection. The transformer also has two (2) terminals that you will wire to the two (2) AC input terminals on the power supply. Please make sure you have wire for both the battery and the transformer connections. If you do not currently have low-voltage wire, you can purchase it in various lengths here.
- Product: 2GIG TAKE-ENCL
- Product Type: Enclosure for Wired to Wireless Converter
- Package Contents: One (1) ABS Plastic Enclosure (UL 94: V-0), One (1) 16.5 VAC 40 VA Power Transformer, One (1) 12/24 VDC Power Supply Board, Mounting Hardware
- Dimensions: 11.5" W x 12.5" H x 4" D (29.2cm x 31.8cm x 10.2cm)
- Material: ABS Plastic
- Agency Listings: UL 94: V-0 Flammability Standards
Power Supply Board:
- Input Voltage: 16.5VAC 40VA
- Output Voltage: Selectable via Jumper / 12 or 24 Volt DC operation.
- Supervision: LED Indicators for power supervision
- Backup Battery: Built-in charger for sealed lead-acid or gel type (battery wire not included).
- Output Voltage: 16.5VAC 40VA
- Dimensions: 2.64 x 4.05 x 2.24 in (6.7 x 10.3 x 5.7 cm)
- Color: White