DIY Wireless Security Systems Frequently Asked Questions

How Do I Cut the Time Delay on My Honeywell Lynx Touch Alarm System?
In order to cut the time delay on a Honeywell alarm system, the user must access the program menu and adjust the entry and exit delays to the desired length.
Added:

How Do I Program an IQ Fob-S to a Qolsys IQ Panel 2?
An IQ FOB-S can be programmed to a Qolsys IQ Panel 2 by auto-learning it to the panel. Once the IQ FOB-S has been enrolled, it should function with the panel.
Added:

How Do I Add a User Code to a Qolsys IQ Panel 2?
A user code can be added to a Qolsys IQ Panel 2 by accessing the panel's user management settings. Once added, the user code can arm and disarm the panel.
Added:

How Do I Reset My Qolsys IQ Panel 2 to Factory Defaults?
In order to reset your Qolsys IQ Panel 2 to its factory default settings, access the dealer settings of the panel and conduct a master reset of the device.
Added:

How Do I Program an IQ Fob to a Qolsys IQ Panel 2?
An IQ FOB keyfob can be programmed to a Qolsys IQ Panel 2 by having it auto-learned with the panel. After doing this, it will function with the IQ Panel 2.
Added:

Which Sensors are Compatible with 2GIG?
Many sensors are compatible with 2GIG security panels. In addition to the 2GIG brand of wireless sensors, Honeywell 5800 Series sensors can be used as well.
Added:

Why Won't My Honeywell L5200 Disarm?
The most common reason for an L5200 to not disarm is because the wrong user code is being entered. Check and make sure the correct code is being entered.
Added:

How Do I Replace a L5100's GSMVLP5-4G Cellular Module?
In order to replace a GSMVLP5-4G in an L5100, you will need to take out the old cellular communicator and then install and register the new communicator.
Added:

How Do I Make My Honeywell L5200 Work w/ AlarmNet 360?
The Honeywell L5200 will need a communicator installed to be able to work with AlarmNet 360. The learn how an alarm company can register the panel, read on.
Added:

How Do I Get into Programming on My Honeywell LYNX Touch?
The programming menu on a Honeywell LYNX Touch can be found within the panel's security menu. You will need to know your installer code to access the menu.
Added: