DIY Wireless Security Systems Frequently Asked Questions
Will Interlogix/GE Sensors Work on an Interlogix Simon XTi or XTi-5?
Interlogix/GE Sensors send wireless signals at a frequency of 319.5 MHz. They will work with the Interlogix Simon XTi and XTi-5 Systems since they accept incoming wireless signals at this frequency. Learn more about which wireless sensors can be used with the Simon XTi and XTi-5 Systems.
Does the Interlogix Simon XT Support Partitions?
It is not possible to use multiple partitions with the Interlogix Simon XT. The panel can only provide support for one single partition that represents the entire system. There is also no way to set different access for different user codes. Learn more about the Interlogix Simon XT System.
What Kind of Wire Do I Need to Use to Install a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 comes with a 5-foot wire that ends with a barrel connector. This barrel connector makes it very easy to connect to the panel. The other end connects to the transformer. A longer 18-gauge 2-conductor wire can also be used if desired. Learn more about powering an IQ Panel 2.
How Long Does a Siren Sound on an Interlogix Simon XTi or XTi-5?
The siren on a Simon XTi or XTi-5 System will continue to sound until the siren timeout period expires. This can be set from anywhere between 2 minutes and 254 minutes. It can also be turned off to have the siren sound indefinitely. Learn how to adjust the Simon XTi and XTi-5 siren timeout.
Can I Connect an Android Phone to an Interlogix Simon XTi or XTi-5?
The Interlogix Simon XTi and XTi-5 Systems can both be controlled and operated using an Android Phone. This is made possible using the Alarm.com Mobile App. A user can access their Alarm.com account through the mobile app to control their Simon System. Learn more about the Alarm.com Mobile App.
How Do I Get Power to an Interlogix Simon XTi or XTi-5?
An Interlogix XTi or XTi-5 receives its power from an 18-gauge 2-conductor wire. The wire connects the system and its plug-in 9-volt AC transformer. A Honeywell LT-Cable can also be used to make the wiring process somewhat easier. Learn more about powering an Interlogix Simon XTi or XTi-5.
Will Honeywell 5800 Sensors Work on an Interlogix Simon XTi or XTi-5?
The Interlogix Simon XTi and XTi-5 Alarm Systems both feature a wireless receiver that accepts incoming signals at a frequency of 319.5 MHz. The Honeywell 5800 Sensors are not compatible since they operate at the 345 MHz frequency. Learn more about the sensors used with the Simon XTi and XTi-5.
Which Deadbolt Lock Is Compatible w/ an Interlogix Simon XTi or XTi-5?
The Simon XTi and XTi-5 Systems are capable of supporting almost any Z-Wave lock once a Z-Wave Controller has been added. The lock is paired with the system and included into the Z-Wave network. It can then be controlled using the Alarm.com service. Learn more about using Z-Wave door locks.
Can I Use an LT-Cable w/ an Interlogix Simon XT Alarm System?
Using a Honeywell LT-Cable can make it easier to get power to a Simon XT System. The cable will eliminate the need to strip any wires, and it will work just as effectively as a traditional 18-gauge 2-conductor wire. Learn more about wiring an Interlogix Simon XT using a Honeywell LT-Cable.
How Do I Add Additional User Codes to an Interlogix Simon XTi or XTi-5?
The option for adding new user codes to an Interlogix Simon XTi or XTi-5 is found through system programming. The system's current Master Code is required to access this menu. Up to eight standard user codes can be added to the system. Learn more about user codes on the XTi and XTi-5.
Interlogix/GE Sensors send wireless signals at a frequency of 319.5 MHz. They will work with the Interlogix Simon XTi and XTi-5 Systems since they accept incoming wireless signals at this frequency. Learn more about which wireless sensors can be used with the Simon XTi and XTi-5 Systems.
Added:
Does the Interlogix Simon XT Support Partitions?
It is not possible to use multiple partitions with the Interlogix Simon XT. The panel can only provide support for one single partition that represents the entire system. There is also no way to set different access for different user codes. Learn more about the Interlogix Simon XT System.
Added:
What Kind of Wire Do I Need to Use to Install a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 comes with a 5-foot wire that ends with a barrel connector. This barrel connector makes it very easy to connect to the panel. The other end connects to the transformer. A longer 18-gauge 2-conductor wire can also be used if desired. Learn more about powering an IQ Panel 2.
Added:
How Long Does a Siren Sound on an Interlogix Simon XTi or XTi-5?
The siren on a Simon XTi or XTi-5 System will continue to sound until the siren timeout period expires. This can be set from anywhere between 2 minutes and 254 minutes. It can also be turned off to have the siren sound indefinitely. Learn how to adjust the Simon XTi and XTi-5 siren timeout.
Added:
Can I Connect an Android Phone to an Interlogix Simon XTi or XTi-5?
The Interlogix Simon XTi and XTi-5 Systems can both be controlled and operated using an Android Phone. This is made possible using the Alarm.com Mobile App. A user can access their Alarm.com account through the mobile app to control their Simon System. Learn more about the Alarm.com Mobile App.
Added:
How Do I Get Power to an Interlogix Simon XTi or XTi-5?
An Interlogix XTi or XTi-5 receives its power from an 18-gauge 2-conductor wire. The wire connects the system and its plug-in 9-volt AC transformer. A Honeywell LT-Cable can also be used to make the wiring process somewhat easier. Learn more about powering an Interlogix Simon XTi or XTi-5.
Added:
Will Honeywell 5800 Sensors Work on an Interlogix Simon XTi or XTi-5?
The Interlogix Simon XTi and XTi-5 Alarm Systems both feature a wireless receiver that accepts incoming signals at a frequency of 319.5 MHz. The Honeywell 5800 Sensors are not compatible since they operate at the 345 MHz frequency. Learn more about the sensors used with the Simon XTi and XTi-5.
Added:
Which Deadbolt Lock Is Compatible w/ an Interlogix Simon XTi or XTi-5?
The Simon XTi and XTi-5 Systems are capable of supporting almost any Z-Wave lock once a Z-Wave Controller has been added. The lock is paired with the system and included into the Z-Wave network. It can then be controlled using the Alarm.com service. Learn more about using Z-Wave door locks.
Added:
Can I Use an LT-Cable w/ an Interlogix Simon XT Alarm System?
Using a Honeywell LT-Cable can make it easier to get power to a Simon XT System. The cable will eliminate the need to strip any wires, and it will work just as effectively as a traditional 18-gauge 2-conductor wire. Learn more about wiring an Interlogix Simon XT using a Honeywell LT-Cable.
Added:
How Do I Add Additional User Codes to an Interlogix Simon XTi or XTi-5?
The option for adding new user codes to an Interlogix Simon XTi or XTi-5 is found through system programming. The system's current Master Code is required to access this menu. Up to eight standard user codes can be added to the system. Learn more about user codes on the XTi and XTi-5.
Added: