Home Automation Controllers Frequently Asked Questions

How Do I Disarm a PROA7 or PROA7PLUS At the Alarm Panel?
Disarm a PROA7 or PROA7PLUS by entering a 4-digit code when prompted. Follow these fast and easy steps to successfully disarm your Honeywell PROA7 or PROA7PLUS.
Added:

Honeywell Lyric Vs. Honeywell Home PROA7 Security System
The Honeywell Lyric and Honeywell Home PROA7 systems are similar in many respects. Here we will compare their features. Keep reading to see the comparison.
Added:

Honeywell Lyric Vs. Honeywell Home PROA7PLUS
The Honeywell Lyric and Honeywell Home PROA7PLUS have many features in common. Here we will contrast and compare them. Keep reading to learn more about both.
Added:

How Do I Quickly Configure a Honeywell Home PROSIXC2W?
First, wire the zones, then calibrate the module. Enter zone programming, then tamper the module. Complete configuration for any used zones. Read on for more.
Added:

How Do I Install a Honeywell Home PROA7PLUS To My Wall?
To install the ProSeries, install additional panel modules, run power and mount the backplate. Attach panel to the backplate then power on. Read on for details.
Added:

How Do I Connect a Honeywell Home PROA7PLUS to WIFI?
Enter Menu, then Settings, enter a valid code and go to WIFI Networks. Choose the proper network, enter the password, and connect. Keep reading to learn more.
Added:

How Do I Change a Master Code on a Honeywell Home PROA7?
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Added:

How Do I Power Down My PROA7 Security System?
To power down the Honeywell Home PROA7 system, first, open the system and disconnect the battery. AC power will be disconnected in one of two ways. Keep reading.
Added:

Why Does My Honeywell Lyric Security Panel Reset Often?
A Lyric Controller can reset for several reasons. Power wiring, an old worn-out battery, or WIFI issues can cause unexpected resets. Keep reading to learn more.
Added:

How Do I Upgrade My 2GIG Edge Panel's Firmware?
The 2GIG Edge can be updated using a USB drive, or over-the-air (OTA) via Alarm.com. OTA updates via WIFI are free and updates via cellular incur a small charge. Learn more!
Added: