PowerG Door & Window Security Sensors Frequently Asked Questions

How Do I Enroll a DSC PG9303 to a Qolsys IQ Panel 2 Plus?
It is recommended that you auto-enroll the DSC PG9303 with your system. The sensor also allows for manual enrollment if needed. Learn how to enroll the DSC PG9303 Sensor.
Added:

How Do I Program a Wireless Zone to a DSC PowerSeries NEO?
Adding a compatible transceiver module will allow you to enroll PowerG Sensors to wireless zones on a PowerSeries NEO System. Learn how to program PowerSeries NEO wireless zones.
Added:

How Do I Program a DSC PG9303 to a Qolsys IQ Panel 2 Plus?
The DSC PG9303 sends out an enrollment signal upon being powered on. Have the sensor send the signal while the IQ2+ is in its auto-enrollment mode. Learn to enroll the DSC PG9303.
Added:

How Do I Walk Test a Qolsys IQ Panel 2 Plus?
There is a System Tests Menu on the Qolsys IQ Panel 2 Plus that can be used for checking sensor signal strength among other things. Learn how to Walk Test a Qolsys IQ Panel 2.
Added:

How Do I Enroll a PowerG Sensor to a DSC PowerSeries NEO?
Programming menu 804 lets you auto-enroll sensors to a PowerSeries NEO. The panel must have an added transceiver module. Learn how to add PowerG Sensors to a DSC PowerSeries NEO.
Added:

Does PowerG Prevent RF Jamming?
PowerG Sensors use Frequency Hopping Spread Spectrum (FHSS) to overcome RF jamming attacks. These attacks can disable other sensors. Learn how PowerG Sensors prevent RF jamming.
Added:

How Do I Enroll My PowerG Wireless Sensor?
The enrollment function on a PowerG Sensor is often activated by inserting fresh batteries or by pressing and holding an enrollment button. Learn how to enroll your PowerG Sensor.
Added:

What is the DSC PG9312?
If you have a PowerG-compatible panel and you need an outdoor contact, then you will definitely want to consider the DSC PG9312. Learn about the DSC PG9312 Outdoor Contact Sensor.
Added:

Can I Use the DSC PowerG PG9312 With the Qolsys IQ Panel 2 Plus?
The DSC PowerG PG9312 will work with any Qolsys IQ Panel 2 Plus running Firmware Version 2.4.0 or higher. Applying the update is very easy. Learn about the DSC PG9312.
Added:

How Do I Factory Default a PowerG Sensor?
By factory defaulting a PowerG Sensor, you can successfully add it to a new system without deleting it from the old one. Learn how to perform a factory reset for a PowerG Sensor.
Added: