PowerG Motion Sensors Frequently Asked Questions

Does the Qolsys IQ Panel 2 Plus Have an Option for Night Stay?
Although you cannot set the IQ Panel 2 Plus to a Night Stay Arming Mode, there are Sensor Groups you can use to have motion sensors active while Armed Stay. Learn about the IQ2+.
Added:

How Do I Enroll the PowerG PG9914 with a Qolsys IQ Panel 2 Plus?
To enroll the PG9914, put the IQ2+ in its auto-enrollment mode, open the PG9914, press and hold its enroll button until its LED is orange, and release. Learn to enroll the PG9914.
Added:

How Do I Remove a PG9914 From the Mounting Bracket?
The DSC PG9914 is often removed from its mounting bracket before mounting the sensor. Learn how to separate the PG9914 from its mounting bracket so that you can mount the device.
Added:

How Do I Program a Wireless Zone to a DSC PowerSeries NEO?
Adding a compatible transceiver module will allow you to enroll PowerG Sensors to wireless zones on a PowerSeries NEO System. Learn how to program PowerSeries NEO wireless zones.
Added:

How Do I Walk Test a Qolsys IQ Panel 2 Plus?
There is a System Tests Menu on the Qolsys IQ Panel 2 Plus that can be used for checking sensor signal strength among other things. Learn how to Walk Test a Qolsys IQ Panel 2.
Added:

Should I Get a PowerG Motion Sensor?
PowerG Motion Sensors are usually the go-to option when the user is using a PowerG compatible system. But alternatives do exist. Find out if you should get a PowerG Motion Sensor.
Added:

How Do I Enroll a PowerG Sensor to a DSC PowerSeries NEO?
Programming menu 804 lets you auto-enroll sensors to a PowerSeries NEO. The panel must have an added transceiver module. Learn how to add PowerG Sensors to a DSC PowerSeries NEO.
Added:

Does PowerG Prevent RF Jamming?
PowerG Sensors use Frequency Hopping Spread Spectrum (FHSS) to overcome RF jamming attacks. These attacks can disable other sensors. Learn how PowerG Sensors prevent RF jamming.
Added:

How Do I Enroll My PowerG Wireless Sensor?
The enrollment function on a PowerG Sensor is often activated by inserting fresh batteries or by pressing and holding an enrollment button. Learn how to enroll your PowerG Sensor.
Added:

How Do I Factory Default a PowerG Sensor?
By factory defaulting a PowerG Sensor, you can successfully add it to a new system without deleting it from the old one. Learn how to perform a factory reset for a PowerG Sensor.
Added: