PowerG Smoke Detectors Frequently Asked Questions

Are a Smoke Alarm and a Smoke Detector The Same Thing?
No, a Smoke Detector is tied to a separate alarm system. A Smoke Alarm is a stand-alone device or group of devices. Keep reading for details on these devices.
Added:

Why Aren't My PowerG Sensors Working After Replacing My IQ Panel 2 Plus?
When replacing an IQ2+, you must follow a special process to sync PowerG Sensors and fix the "Not Networked" condition. Learn to fix the "Not Networked" error for PowerG Sensors.
Added:

How Do I Program a Wireless Zone to a DSC PowerSeries NEO?
Adding a compatible transceiver module will allow you to enroll PowerG Sensors to wireless zones on a PowerSeries NEO System. Learn how to program PowerSeries NEO wireless zones.
Added:

Can The 2-Wire Smoke Zone On The Qolsys IQ Hardwire 16-F Support One-Go-All-Go?
It is not possible to use a power reversing relay with the 2-wire smoke detector zone on the IQ Hardwire 16-F to support one-go-all-go. Learn more about the IQ Hardwire 16-F.
Added:

How Do I Enroll a PowerG Sensor to a DSC PowerSeries NEO?
Programming menu 804 lets you auto-enroll sensors to a PowerSeries NEO. The panel must have an added transceiver module. Learn how to add PowerG Sensors to a DSC PowerSeries NEO.
Added:

Does PowerG Prevent RF Jamming?
PowerG Sensors use Frequency Hopping Spread Spectrum (FHSS) to overcome RF jamming attacks. These attacks can disable other sensors. Learn how PowerG Sensors prevent RF jamming.
Added:

How Do I Enroll My PowerG Wireless Sensor?
The enrollment function on a PowerG Sensor is often activated by inserting fresh batteries or by pressing and holding an enrollment button. Learn how to enroll your PowerG Sensor.
Added:

How Do I Enroll the PowerG Smoke Detectors?
The PowerG Smoke Detectors have an enrollment buttons that allow you to auto-enroll these wireless sensors to a panel. Learn how to auto-enroll PowerG Smoke Detectors.
Added:

How Do I Properly Test My PowerG Smoke Detector?
In order to test a PowerG Smoke Detector, it must be properly enrolled with your panel. You can use the test button or canned smoke. Learn how to test a PowerG Smoke Detector.
Added:

How Do I Factory Default a PowerG Sensor?
By factory defaulting a PowerG Sensor, you can successfully add it to a new system without deleting it from the old one. Learn how to perform a factory reset for a PowerG Sensor.
Added: