Wireless Receivers Frequently Asked Questions

How Do I Control my 2GIG GC3 via WIFI?
In order to use WIFI connectivity with the 2GIG GC3, the panel must have the required Firmware Update installed. It can then connect with a WIFI network.
Added:

How Loud is the Siren in a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 features a piezo siren with a minimum SPL of 85dB. This successfully meets the UL Standard for household fire systems (UL 985).
Added:

How Many Zones Can a 5881 Medium Board Handle?
The Honeywell 5881ENM medium wireless receiver provides support for up to 16 wireless zones, and it is compatible with all Honeywell Vista control panels.
Added:

Why Does My Security System Need a Honeywell 5800RP?
A wireless Honeywell security system needs a Honeywell 5800RP to extend the range of its radio frequency. This can solve issues such as RF supervision loss.
Added:

What Is the Best Honeywell Sensor for the 21iP?
The best sensor for the Honeywell Vista 21iP depends on what the sensor is used for. There are many great sensors compatible with the Vista 21iP panel.
Added:

How Do I Make My Honeywell L5200 Work w/ AlarmNet 360?
The Honeywell L5200 will need a communicator installed to be able to work with AlarmNet 360. The learn how an alarm company can register the panel, read on.
Added:

What Kind of Battery Does the Honeywell 5800RP Use?
The 5800RP uses a 7.2 VDC Ni-MH rechargeable battery, capable of providing up to 6 hours of standby operation in the event of AC loss. Read on to learn more.
Added:

What Frequency Do the 5800 Sensors Operate at?
Honeywell's 5800 series wireless devices operate at 345 MHz. This frequency was assigned to them by the FCC, and should operate free of interference in the US.
Added:

How Do I Program a 5800RP to a Lyric Controller or a Lynx Touch?
A 5800RP is programmed to a Honeywell security system by assigning it to a zone. This will provide the panel with notices regarding the status of the 5800RP.
Added:

How Do I Wire a 6162RF to a VISTA?
The 6162RF has 4 wires, two for power, and two for data. It connects to the keypad bus of the Vista panel. Learn to wire the 6162RF to a Vista panel.
Added: