Wireless Receivers Frequently Asked Questions

What Frequency Do the 5800 Sensors Operate at?
Honeywell's 5800 series wireless devices operate at 345 MHz. This frequency was assigned to them by the FCC, and should operate free of interference in the US.
Added:

How Do I Program a 5800RP to a Lyric Controller or a Lynx Touch?
A 5800RP is programmed to a Honeywell security system by assigning it to a zone. This will provide the panel with notices regarding the status of the 5800RP.
Added:

How Do I Wire a 6162RF to a VISTA?
The 6162RF has 4 wires, two for power, and two for data. It connects to the keypad bus of the Vista panel. Learn to wire the 6162RF to a Vista panel.
Added:

Can a VISTA Security System Use 2 Wireless Receivers?
The number of receivers supported by a Vista panel depends on the panel used, as well as other factors. Find out how many wireless receivers are supported.
Added:

Can VISTA Systems Use the 6160RF and Wireless Receivers?
Vista panels support hardwired and wireless expansion. Receivers can be stand alone, or built into a keypad. Learn about using the 6160RF with a Vista System.
Added:

How Do I Remove the VISTA 20P Expansion Module?
The Vista-20P supports both Wireless and Wired Zone Expansion. Learn how you can remove an expansion module and clear any trouble message this causes.
Added:

Lyric Gateway Vs. Honeywell Vista System
This comparison chart highlights common features between the two panel types. Decide which panel is right for you.
Added:

Lyric Gateway Vs. Honeywell L7000
Comparison Chart
Added:

How do I Program a Duress Code Into My Lyric Gateway?
Programming a Duress Code into the Lyric Gateway
Added:

How do I Perform a Go No Go Test on a Lyric Gateway?
Performing the Go No Go Test on the Lyric Gateway
Added: