Frequently Asked Questions
How Do I Disable Auto-Stay Arming on the 2GIG GC3?
The Auto Stay option within Panel Programming is Q14. You can enable or disable this option by accessing the menu. Learn to disable Auto-Stay Arming for the 2GIG GC3.
How Do I Disable Auto-Stay Arming on the 2GIG GC2?
The Auto-Stay Arming option for the 2GIG GC2 is Question 26 within the System Configuration Menu. Find out how to disable Auto-Stay Arming on the 2GIG GC2 System.
How Do I Disable Auto-Stay Arming on the Qolsys IQ Panel 2?
Auto-Stay Arming reverts the system to Arm Stay mode if no entry/exit zone is faulted during the exit delay period when Arming Away. Learn how to disable this feature on the IQ2.
How Do I Disable Auto-Stay Arming on the Honeywell Lyric Alarm System?
A user might want to disable Auto-Stay Arming so that Arm Away mode activates even if they don't trigger an entry/exit zone. Learn how to disable Auto-Stay Arming on the Lyric.
What is Auto-Stay Arming?
If a user sets their system to Arm Away but they don't activate an entry/exit zone, the system will use Auto-Stay Arming to revert to Arm Stay mode. Learn about Auto-Stay Arming.
How Do I Connect a 2GIG Alarm System Transformer?
The 2GIG Systems use DC power. You must follow polarity when connecting the wire from the transformer to the panel. Learn how to connect a 2GIG system with its its transformer.
What Sensors are Compatible with Total Connect?
A user can view any sensor through Total Connect after it has been programmed with the system. You may need to perform a panel sync to get it to appear. Learn about Total Connect.
How Do I Set My Honeywell Alarm System When I Leave the House?
The standard practice when a user leaves their property is to set their alarm system to Arm Away mode. Learn how you can set your Honeywell Alarm System to Arm Away.
How Do I Install a 2GIG DW20R-345?
To install a 2GIG DW20R-345 Recessed Contact, you must drill a 0.5 inch deep hole into the door and a 2.6 inch deep hole in the frame. Learn how to install a 2GIG DW20R-345.
How Do I Add a Repeater to My 2GIG Wireless Alarm System?
A wireless repeater will allow you to extend the signal range of wireless sensors used with your 2GIG Wireless Alarm System. Learn about alarm system repeaters.
The Auto Stay option within Panel Programming is Q14. You can enable or disable this option by accessing the menu. Learn to disable Auto-Stay Arming for the 2GIG GC3.
Added:
How Do I Disable Auto-Stay Arming on the 2GIG GC2?
The Auto-Stay Arming option for the 2GIG GC2 is Question 26 within the System Configuration Menu. Find out how to disable Auto-Stay Arming on the 2GIG GC2 System.
Added:
How Do I Disable Auto-Stay Arming on the Qolsys IQ Panel 2?
Auto-Stay Arming reverts the system to Arm Stay mode if no entry/exit zone is faulted during the exit delay period when Arming Away. Learn how to disable this feature on the IQ2.
Added:
How Do I Disable Auto-Stay Arming on the Honeywell Lyric Alarm System?
A user might want to disable Auto-Stay Arming so that Arm Away mode activates even if they don't trigger an entry/exit zone. Learn how to disable Auto-Stay Arming on the Lyric.
Added:
What is Auto-Stay Arming?
If a user sets their system to Arm Away but they don't activate an entry/exit zone, the system will use Auto-Stay Arming to revert to Arm Stay mode. Learn about Auto-Stay Arming.
Added:
How Do I Connect a 2GIG Alarm System Transformer?
The 2GIG Systems use DC power. You must follow polarity when connecting the wire from the transformer to the panel. Learn how to connect a 2GIG system with its its transformer.
Added:
What Sensors are Compatible with Total Connect?
A user can view any sensor through Total Connect after it has been programmed with the system. You may need to perform a panel sync to get it to appear. Learn about Total Connect.
Added:
How Do I Set My Honeywell Alarm System When I Leave the House?
The standard practice when a user leaves their property is to set their alarm system to Arm Away mode. Learn how you can set your Honeywell Alarm System to Arm Away.
Added:
How Do I Install a 2GIG DW20R-345?
To install a 2GIG DW20R-345 Recessed Contact, you must drill a 0.5 inch deep hole into the door and a 2.6 inch deep hole in the frame. Learn how to install a 2GIG DW20R-345.
Added:
How Do I Add a Repeater to My 2GIG Wireless Alarm System?
A wireless repeater will allow you to extend the signal range of wireless sensors used with your 2GIG Wireless Alarm System. Learn about alarm system repeaters.
Added: