Frequently Asked Questions
How Do I Setup Low-temp & Freeze Detection On a 5800COMBO?
In order to setup a Honeywell 5800COMBO for low-temperature and freeze detection, you must set the device to loop number 3 within zone programming. This is the loop number that tells the device to function as a low-temperature sensor. Learn more about the Honeywell 5800COMBO and its functions.
Does a 5800COMBO Do Low-Temp & Freeze Detection Like the 5808W3?
The 5800COMBO offers a low-temperature and freeze detection function that works in the same way as the low-temperature detection function on the 5808W3. This is done by setting the device to loop number 3 within zone programming. Learn more about the 5800COMBO and its programmable functions.
Can I use the Lynx-WEXT with my Qolsys IQ Panel 2?
Yes, the Lynx-WEXT can be used with the Qolsys IQ Panel 2. By adding the Lynx-WEXT to your Qolsys panel, an external siren, or sirens, drawing up to 1.2 Amps of current can be supported. The Lynx-WEXT contains everything except the siren. Learn more about adding a high current siren here.
How Does a Fire Detector Work?
There are two primary methods for detecting a fire. These are through either smoke detection and heat detection. For that reason, a "fire detector" is more commonly referred to as a "smoke detector" or a "heat detector". There are also combo smoke and heat sensors. Learn more about these devices.
Where Should I Install My Motion Detector?
There are several things you should keep in mind when choosing a location for a motion detector. The ideal location for a motion detector is in the corner of a room and away from any windows. The device should be placed 6 to 8 feet off the ground. Learn more about where to install a motion sensor.
How Do I Install an Alarm.com Camera?
Most Alarm.com Cameras are installed in a very similar manner. These cameras come with a mounting plate and screws. After drilling some holes, the mounting plate can be screwed into the wall. The camera can then be attached to the mounting plate. Learn more about installing an Alarm.com Camera.
Can I Add a Wired Siren to the Qolsys IQ Panel 2?
A wired siren can be added to a Qolsys IQ Panel 2 system. The device connects to the siren outputs on the back of the IQ Panel 2. The siren is powered using any 12VDC plug-in transformer. Once installed, it will function automatically. Learn more about using a wired siren with an IQ Panel 2.
Which Glass Break Sensors Work w/ ADT Security Systems?
ADT equipment is often comparable to that of Honeywell. In fact, many ADT sensors are simply re-branded Honeywell sensors. For that reason, Honeywell glass break sensors will often work with ADT alarm systems. Learn more about which glass break sensors are compatible with ADT security panels.
Why Did My Panel Report Code E339 "Power on Reset"?
A Honeywell Panel will report the message E339 "Power on Reset" when its communicator has been reset. The communicator for a Honeywell System will reset whenever programming changes are sent to the module or when the module is powered off and then back on. Learn more about the E339 message.
Do I Need Dispatch If I Live In An Apartment?
Just because you live in an apartment doesn't mean that you shouldn't have central station monitoring with automatic dispatch. If you want help to be automatically sent out to your home in the event of an emergency, then you must have dispatch. Learn more about central station monitoring.
In order to setup a Honeywell 5800COMBO for low-temperature and freeze detection, you must set the device to loop number 3 within zone programming. This is the loop number that tells the device to function as a low-temperature sensor. Learn more about the Honeywell 5800COMBO and its functions.
Added:
Does a 5800COMBO Do Low-Temp & Freeze Detection Like the 5808W3?
The 5800COMBO offers a low-temperature and freeze detection function that works in the same way as the low-temperature detection function on the 5808W3. This is done by setting the device to loop number 3 within zone programming. Learn more about the 5800COMBO and its programmable functions.
Added:
Can I use the Lynx-WEXT with my Qolsys IQ Panel 2?
Yes, the Lynx-WEXT can be used with the Qolsys IQ Panel 2. By adding the Lynx-WEXT to your Qolsys panel, an external siren, or sirens, drawing up to 1.2 Amps of current can be supported. The Lynx-WEXT contains everything except the siren. Learn more about adding a high current siren here.
Added:
How Does a Fire Detector Work?
There are two primary methods for detecting a fire. These are through either smoke detection and heat detection. For that reason, a "fire detector" is more commonly referred to as a "smoke detector" or a "heat detector". There are also combo smoke and heat sensors. Learn more about these devices.
Added:
Where Should I Install My Motion Detector?
There are several things you should keep in mind when choosing a location for a motion detector. The ideal location for a motion detector is in the corner of a room and away from any windows. The device should be placed 6 to 8 feet off the ground. Learn more about where to install a motion sensor.
Added:
How Do I Install an Alarm.com Camera?
Most Alarm.com Cameras are installed in a very similar manner. These cameras come with a mounting plate and screws. After drilling some holes, the mounting plate can be screwed into the wall. The camera can then be attached to the mounting plate. Learn more about installing an Alarm.com Camera.
Added:
Can I Add a Wired Siren to the Qolsys IQ Panel 2?
A wired siren can be added to a Qolsys IQ Panel 2 system. The device connects to the siren outputs on the back of the IQ Panel 2. The siren is powered using any 12VDC plug-in transformer. Once installed, it will function automatically. Learn more about using a wired siren with an IQ Panel 2.
Added:
Which Glass Break Sensors Work w/ ADT Security Systems?
ADT equipment is often comparable to that of Honeywell. In fact, many ADT sensors are simply re-branded Honeywell sensors. For that reason, Honeywell glass break sensors will often work with ADT alarm systems. Learn more about which glass break sensors are compatible with ADT security panels.
Added:
Why Did My Panel Report Code E339 "Power on Reset"?
A Honeywell Panel will report the message E339 "Power on Reset" when its communicator has been reset. The communicator for a Honeywell System will reset whenever programming changes are sent to the module or when the module is powered off and then back on. Learn more about the E339 message.
Added:
Do I Need Dispatch If I Live In An Apartment?
Just because you live in an apartment doesn't mean that you shouldn't have central station monitoring with automatic dispatch. If you want help to be automatically sent out to your home in the event of an emergency, then you must have dispatch. Learn more about central station monitoring.
Added: