Frequently Asked Questions
How Do Alarm Sensors Communicate?
The method that an alarm sensor uses to communicate with the panel varies depending upon the type of sensor. Common communication methods include a wireless RF signal, a hardwired connection and WIFI communication. Continue reading to learn more.
What Sensors Work with a Honeywell L5210 & L7000?
If you are using wireless sensors with a Honeywell L5210 or L7000, you will generally want to use sensors from the Honeywell 5800 Series. All of the 5800 Series sensors will work with these systems. You can also use a 5800C2W to use hardwired sensors if desired. Read on to learn more.
What Kind of Security Systems are Compatible w/ Total Connect?
Total Connect is exclusively for use with Honeywell security systems. This includes any VISTA Panel, any LYNX Series Panel and the Lyric Controller. With Total Connect, you can arm and disarm your system, check the status of your sensors and control Z-Wave devices. Learn more about Total Connect.
How Long Does a Honeywell Siren Sound When it’s Activated?
The length of time that an activated Honeywell siren will sound for depends on the panel's bell timeout setting. Once this duration of time has passed, the siren will stop making noise. It is possible to set different bell timeouts for security sirens and fire sirens. Keep reading to learn more.
How Do I Add a Cellular Module to a Lyric Controller?
The Lyric features an expansion slot on its side where a cellular module can be added. Within advanced settings, there is an option for installing a cellular communicator. Put the Lyric into this mode, and then insert the module into the slot. Keep reading to learn more about this Lyric add-on.
How Do I Open My 2GIG GC2 Security System?
To open up a 2GIG GC2 panel, you will need a flathead screwdriver. Lay the system face down, and use the screwdriver to release the latches that hold the back cover in place. Once both latches have been released, you can pull the back cover off. Learn more about opening up a GC2 system.
Can I Add Sensors to My Home Alarm on My Own?
Programming sensors to a home alarm system is a task that can be completed by an end user. To do this, the user will need to know the Installer Code for their system. This code will allow the user to access zone programming so that they can program a sensor. Learn more about adding sensors.
How Do I Add a Picture to a Honeywell L7000?
Users have no way to add pictures to a Honeywell LYNX Touch system, such as the L7000. Previously, this was done using the Total Connect service. However, Honeywell removed this capability, and now it is impossible to upload pictures to an L7000 panel. Learn more about pictures on the L7000.
How Do I Setup the Slideshow on My Honeywell LYNX Touch?
The slideshow feature on a LYNX Touch will have a series of images appear on the panel's screen if the system is left idle for a predetermined period of time. To do this, you must have images uploaded to your LYNX Touch system. There is currently no way to upload new images. Read on to learn more.
Why Won't My Keyfob Disarm My 2GIG System After a Panic Alarm?
After a panic alarm has been activated on a 2GIG system, the system must be disarmed from the panel itself. This involves entering in the Master Code or any valid user code. For security purposes, disarming with a keyfob is not possible after a panic. Learn more about disarming a 2GIG system.
The method that an alarm sensor uses to communicate with the panel varies depending upon the type of sensor. Common communication methods include a wireless RF signal, a hardwired connection and WIFI communication. Continue reading to learn more.
Added:
What Sensors Work with a Honeywell L5210 & L7000?
If you are using wireless sensors with a Honeywell L5210 or L7000, you will generally want to use sensors from the Honeywell 5800 Series. All of the 5800 Series sensors will work with these systems. You can also use a 5800C2W to use hardwired sensors if desired. Read on to learn more.
Added:
What Kind of Security Systems are Compatible w/ Total Connect?
Total Connect is exclusively for use with Honeywell security systems. This includes any VISTA Panel, any LYNX Series Panel and the Lyric Controller. With Total Connect, you can arm and disarm your system, check the status of your sensors and control Z-Wave devices. Learn more about Total Connect.
Added:
How Long Does a Honeywell Siren Sound When it’s Activated?
The length of time that an activated Honeywell siren will sound for depends on the panel's bell timeout setting. Once this duration of time has passed, the siren will stop making noise. It is possible to set different bell timeouts for security sirens and fire sirens. Keep reading to learn more.
Added:
How Do I Add a Cellular Module to a Lyric Controller?
The Lyric features an expansion slot on its side where a cellular module can be added. Within advanced settings, there is an option for installing a cellular communicator. Put the Lyric into this mode, and then insert the module into the slot. Keep reading to learn more about this Lyric add-on.
Added:
How Do I Open My 2GIG GC2 Security System?
To open up a 2GIG GC2 panel, you will need a flathead screwdriver. Lay the system face down, and use the screwdriver to release the latches that hold the back cover in place. Once both latches have been released, you can pull the back cover off. Learn more about opening up a GC2 system.
Added:
Can I Add Sensors to My Home Alarm on My Own?
Programming sensors to a home alarm system is a task that can be completed by an end user. To do this, the user will need to know the Installer Code for their system. This code will allow the user to access zone programming so that they can program a sensor. Learn more about adding sensors.
Added:
How Do I Add a Picture to a Honeywell L7000?
Users have no way to add pictures to a Honeywell LYNX Touch system, such as the L7000. Previously, this was done using the Total Connect service. However, Honeywell removed this capability, and now it is impossible to upload pictures to an L7000 panel. Learn more about pictures on the L7000.
Added:
How Do I Setup the Slideshow on My Honeywell LYNX Touch?
The slideshow feature on a LYNX Touch will have a series of images appear on the panel's screen if the system is left idle for a predetermined period of time. To do this, you must have images uploaded to your LYNX Touch system. There is currently no way to upload new images. Read on to learn more.
Added:
Why Won't My Keyfob Disarm My 2GIG System After a Panic Alarm?
After a panic alarm has been activated on a 2GIG system, the system must be disarmed from the panel itself. This involves entering in the Master Code or any valid user code. For security purposes, disarming with a keyfob is not possible after a panic. Learn more about disarming a 2GIG system.
Added: