Honeywell 6150 Frequently Asked Questions

Can I Disable the Sound of a Honeywell 6150 Keypad?
The 6150 has a piezo-electric sounder rather than a speaker and can't be disconnected. You can suppress some sounds via programming. Read on to learn more!
Added:

Can I Change the Time on My VISTA-P System w/o Using the Master Code?
You can use your Master Code or the Installer Code to change the date and time on a Honeywell VISTA P-Series System. By using one of these codes plus the [#63] command, you can change the date and time on your Honeywell VISTA. Learn more about adjusting your VISTA panel's date and time.
Added:

How Do I Turn Off My Honeywell Alarm System's Chime?
Turning of the chime on a Honeywell Alarm System is very easy. However, the process will vary slightly depending upon what type of Honeywell Panel is being used. Hardwired Vista Panels follow a different process than wireless Honeywell Systems. Learn more about the chime on a Honeywell system.
Added:

What Does FC Stand For on My Alarm System?
An FC code indicates that a Honeywell VISTA System is having trouble communicating. This message is often displayed on a keypad when the panel previously used its built-in dialer to send signals. This error code can be cleared by most end users. Learn more about the FC code on a VISTA panel.
Added:

How Do I Clear the FC Code on my Honeywell Alarm?
An FC code on a Honeywell VISTA System stands for Failed To Communicate. This means that the panel attempted to dial out using its built-in dialer, and it did not receive acknowledgement that the signal was accepted. Learn more about clearing the FC code on a Honeywell security system.
Added:

How Do I Make My 6160RF Chime When a Zone is Opened?
Enabling the chime on a 6160RF keypad is a very easy process. However, the user will need to know the Master Code for the system to enable this feature. Once the chime has been enabled, the keypad will chime whenever a zone is faulted. Learn more about the chime feature on a 6160RF keypad.
Added:

What Field is Device Programming on a VISTA-21iP?
There is no single device programming field on the 21iP. Device programming refers to any device connected to the keypad bus. Learn about device programming.
Added:

How Do I Turn On the Backlight on a Honeywell 6150 Keypad?
The Honeywell 6150 fixed English keypad's backlight is always on. A user can activate it by pressing any key on the keypad. Learn about Honeywell's backlights.
Added:

Can I Wire a 6150 to an AUX Power Supply?
A 6150 can be wired to a power supply if connecting to the panel’s power output requires too much current. Learn how to connect a 6150 to an AUX Power Supply.
Added:

Which Keypads Work with a VISTA 21iP?
The VISTA alarm systems are compatible with multiple different wired and wireless keypads. Learn about the keypads we offer that are compatible with the system.
Added: