Honeywell Home PROA7 Frequently Asked Questions
How Do I Install a Honeywell Home PROA7PLUS To My Wall?
To install the ProSeries, install additional panel modules, run power and mount the backplate. Attach panel to the backplate then power on. Read on for details.
How Do I Connect a Honeywell Home PROA7PLUS to WIFI?
Enter Menu, then Settings, enter a valid code and go to WIFI Networks. Choose the proper network, enter the password, and connect. Keep reading to learn more.
How Do I Change a Master Code on a Honeywell Home PROA7?
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Why Can't I Pair a PROWLTOUCH to a PROA7 or PROA7PLUS?
The ProSeries panel and the PROWLTOUCH find each other using a service called "Bonjour" or mDNS. Not all routers handle this well. Learn to overcome this issue.
How Do I Power Down My PROA7 Security System?
To power down the Honeywell Home PROA7 system, first, open the system and disconnect the battery. AC power will be disconnected in one of two ways. Keep reading.
How Do I Add GD00Z-8-GC Garage CNTRL to ProA7/ProA7Plus?
Note the DSK Pin, then mount the hardware. Put the panel into inclusion mode then press the Link button on the GD00Z-8-GC. Enter the Pin when prompted by the panel. Learn more.
Can I Use the PROA7PLUS With Alarm.com?
The Honeywell Home PROA7PLUS cannot be used with Alarm.com. But it can be used with a similar interactive platform called Total Connect 2.0. Learn about the PROA7PLUS.
Can I Use the Resideo PROA7C With Alarm.com?
There is no Alarm.com Communicator for the Resideo PROA7C. This makes it impossible to be used with Alarm.com. But it can be set up with Total Connect 2.0. Learn about the PROA7C.
How Do I Install a Honeywell Home PROTAKEOVER in a PROA7PLUS?
In order to use the 123 legacy zones for a Honeywell Home PROA7PLUS, you must install a PROTAKEOVER Legacy Receiver inside the panel. Learn how to install a PROTAKEOVER Module.
How Do I Get Into Programming On My PROA7PLUS?
Programming access is available on ProSeries System Update Version 3.591.92.0 and higher. Learn how you can get into programming mode on your PROA7PLUS Security System.
To install the ProSeries, install additional panel modules, run power and mount the backplate. Attach panel to the backplate then power on. Read on for details.
Added:
How Do I Connect a Honeywell Home PROA7PLUS to WIFI?
Enter Menu, then Settings, enter a valid code and go to WIFI Networks. Choose the proper network, enter the password, and connect. Keep reading to learn more.
Added:
How Do I Change a Master Code on a Honeywell Home PROA7?
The Honeywell Home PROA7 has one Master Code. To edit it enter Menu, Settings, User Management and entering the current Master Code. Keep reading to learn more.
Added:
Why Can't I Pair a PROWLTOUCH to a PROA7 or PROA7PLUS?
The ProSeries panel and the PROWLTOUCH find each other using a service called "Bonjour" or mDNS. Not all routers handle this well. Learn to overcome this issue.
Added:
How Do I Power Down My PROA7 Security System?
To power down the Honeywell Home PROA7 system, first, open the system and disconnect the battery. AC power will be disconnected in one of two ways. Keep reading.
Added:
How Do I Add GD00Z-8-GC Garage CNTRL to ProA7/ProA7Plus?
Note the DSK Pin, then mount the hardware. Put the panel into inclusion mode then press the Link button on the GD00Z-8-GC. Enter the Pin when prompted by the panel. Learn more.
Added:
Can I Use the PROA7PLUS With Alarm.com?
The Honeywell Home PROA7PLUS cannot be used with Alarm.com. But it can be used with a similar interactive platform called Total Connect 2.0. Learn about the PROA7PLUS.
Added:
Can I Use the Resideo PROA7C With Alarm.com?
There is no Alarm.com Communicator for the Resideo PROA7C. This makes it impossible to be used with Alarm.com. But it can be set up with Total Connect 2.0. Learn about the PROA7C.
Added:
How Do I Install a Honeywell Home PROTAKEOVER in a PROA7PLUS?
In order to use the 123 legacy zones for a Honeywell Home PROA7PLUS, you must install a PROTAKEOVER Legacy Receiver inside the panel. Learn how to install a PROTAKEOVER Module.
Added:
How Do I Get Into Programming On My PROA7PLUS?
Programming access is available on ProSeries System Update Version 3.591.92.0 and higher. Learn how you can get into programming mode on your PROA7PLUS Security System.
Added: