Qolsys IQ Panel 2 Plus Frequently Asked Questions

How Do I Add a Qolsys IQ Remote To The IQ Panel 2 In Access Point Mode?
Turn on AP Mode in the Qolsys IQ Panel 2. Set the SSID and Password, and join the IQ Remote to this network. Finally, pair the IQ Remote with the Panel and verify operating range.
Added:

How Do I Reboot My Qolsys IQ Panel 2?
Rebooting an IQ Panel 2 System can be an important step for troubleshooting and for making sure that certain features are pushed down. Learn how to reboot your Qolsys IQ Panel 2.
Added:

How Do I Stream an Alarm.com Camera to My Qolsys IQ Panel 2?
To stream an ADC Camera to a IQ Panel 2, you must pair it with an ADC account and enable the "View at the Panel" option. Learn how to stream a camera to the IQ Panel 2.
Added:

How Do I Add a LiftMaster Garage Door Opener to a Qolsys IQ Panel 2?
A Z-Wave garage door opener can integrate a garage door motor with a Qolsys IQ Panel 2. A good device for this purpose is the Linear GD00Z. Learn more about this Z-Wave device.
Added:

How Do I Use a Qolsys IQ Panel 2 to Control a Garage Door?
By setting up a Z-Wave garage door opener, you will be able to control your garage door right from your IQ Panel 2. Learn how to set up your IQ Panel 2 for garage door control.
Added:

What Is the Range on a Qolsys Security System?
Qolsys 319.5 MHz sensors have a range of 600 feet in open air. But the IQ Panel 2 Plus can use PowerG Sensors with a max range of 2k feet. Find out the range of a Qolsys Panel.
Added:

What is the Range on a Qolsys Plus Security System?
The Qolsys IQ Panel 2 Plus System can use PowerG Sensors with a range of up to 2k feet. This can be extended using a wireless repeater. Find out the range of the IQ Panel 2 Plus.
Added:

How Do I Add a Z-Wave Device to the Qolsys IQ Panel 2?
Z-Wave devices are enrolled with the IQ Panel 2 by putting the panel in its Z-Wave pairing mode and then activating the device's inclusion function. Learn to pair a Z-Wave device.
Added:

Is a Qolsys IQ Panel 2 Zigbee Compatible?
The Qolsys IQ Panel 2 has limited functionality with Zigbee. By adding an IQ Card-IS daughtercard, the system can support Zigbee Image Sensors. Learn more about the IQ Card-IS.
Added:

How Do I Enable the Built-In Glass Break Zone for the IQ Panel 2?
The IQ Panel 2 has a built-in glass break detector that triggers an alarm if activated while the system is armed. Learn how to enable the internal glass break for the IQ Panel 2.
Added: