Qolsys IQ Panel 2 Plus Frequently Asked Questions

Do I Need a SIM Card for a Qolsys IQ Panel 2 Plus?
The Qolsys IQ Panel 2 Plus comes with a built-in LTE communicator, and no SIM card needs to be added. Learn about the IQ Panel 2 Plus and how to activate it for monitoring service.
Added:

How Does RF Supervision Work On the Qolsys IQ Panel 2?
If the IQ Panel 2 does not receive a check-in from a sensor within a set period of time, then an RF supervision loss condition will be displayed. Learn about the IQ Panel 2.
Added:

Can I Show Temperature on a Qolsys IQ Panel 2?
The Qolsys IQ Panel 2 can show the local high-low temperature forecast, as well as the temperature from a Z-Wave thermostat. Learn about the Qolsys IQ Panel 2 System.
Added:

How Do I Add a Z-Wave Light to My IQ Panel 2?
Adding a Z-Wave light to your IQ Panel 2 will let you control it from the panel and from Alarm.com if the system is monitored. Learn how to add a Z-Wave light to an IQ Panel 2.
Added:

Can I Connect an IQ Panel 2 Plus to Alexa?
If your IQ Panel 2 Plus is connected with Alarm.com, then you can enable the Alarm.com Alexa Skill to control the system using Amazon Alexa. Learn about the Alarm.com Alexa Skill.
Added:

Does Alexa Work with Qolsys?
After setting your Qolsys System up with Alarm.com, you can enable the Alarm.com Skill to start using Alexa voice commands with you system. Learn about Amazon Alexa and Alarm.com.
Added:

How Do I Find the IMEI Number on a Qolsys IQ Panel 2 Plus?
The IMEI Number is found within the Cellular sub-menu of the About menu. This code is needed to activate the system for monitoring. Learn how to find the IQ2+ IMEI Number.
Added:

What Security Systems Support the DSC PG9312 Outdoor Contact?
You can use the DSC PG9312 with most PowerG-compatible systems. A Qolsys IQ Panel 2 Plus System must be running Firmware Version 2.4.0 or higher. Learn about the DSC PG9312.
Added:

How Do I Replace My Existing Wired Panel With the Qolsys Hardwire 16-F?
Mark the existing wires, then move them from the panel to the 16-F. Enroll the Hardwire 16-F and its zones to the panel and finally, test the zones. Learn about the Hardwire 16-F.
Added:

Does Alarm Monitoring Cost More if I Add Partitions?
Partitioning is a feature built into an alarm system. Whether or not you use partitioning will not affect the cost of your monitoring plan. Learn about partitioning.
Added: