Resideo PROA7C Frequently Asked Questions

How Do I Power Down My PROA7 Security System?
To power down the Honeywell Home PROA7 system, first, open the system and disconnect the battery. AC power will be disconnected in one of two ways. Keep reading.
Added:

How Do I Add GD00Z-8-GC Garage CNTRL to ProA7/ProA7Plus?
Note the DSK Pin, then mount the hardware. Put the panel into inclusion mode then press the Link button on the GD00Z-8-GC. Enter the Pin when prompted by the panel. Learn more.
Added:

How Do I Add a Z-Wave Lock to a Resideo PROA7C?
To pair a Z-Wave lock with a PROA7C, a PROWIFIZW is needed. User codes can be pushed from the panel to the lock for unlocking and disarming. Learn how to pair a lock for a PROA7C.
Added:

Is the Resideo PROA7C Compatible w/ All Resideo PROSIX Sensors?
The Resideo PROA7C supports all PROSIX Sensors. The system can also support SiX Sensors, plus (1) of five (5) legacy sensor frequencies if a PROTAKEOVER unit is added. Learn more.
Added:

Can I Use the PROA7PLUS With Alarm.com?
The Honeywell Home PROA7PLUS cannot be used with Alarm.com. But it can be used with a similar interactive platform called Total Connect 2.0. Learn about the PROA7PLUS.
Added:

Can I Use the Resideo PROA7C With Alarm.com?
There is no Alarm.com Communicator for the Resideo PROA7C. This makes it impossible to be used with Alarm.com. But it can be set up with Total Connect 2.0. Learn about the PROA7C.
Added:

How Do I Reset the Master Code on a Resideo PROA7C Security System?
The Master Code on a PROA7C can be set back to 1234 using the current Master Code, or you can use the Installer Code to factory default the system and reset the code. Learn more.
Added:

How Do I Install a Honeywell Home PROTAKEOVER in a PROA7PLUS?
In order to use the 123 legacy zones for a Honeywell Home PROA7PLUS, you must install a PROTAKEOVER Legacy Receiver inside the panel. Learn how to install a PROTAKEOVER Module.
Added:

How Do I Get Into Programming On My PROA7PLUS?
Programming access is available on ProSeries System Update Version 3.591.92.0 and higher. Learn how you can get into programming mode on your PROA7PLUS Security System.
Added:

How Do I Add a Wireless Zone to the Honeywell Home PROA7PLUS?
There are 250 wireless zones on a PROA7PLUS. Including 127 zones for PROSIX and SiX Encrypted Sensors and 123 zones for legacy RF sensors by adding a PROTAKEOVER module. Read on to learn more.
Added: