Resideo PROA7PLUSC Frequently Asked Questions
How Do I Enable Camera Viewing On a PROA7PLUSC?
The PROA7PLUSC must be connected to the same WIFI network as the cameras. Compatible cameras must be enabled for viewing. Click here for full instructions.
How Do I Turn off My Honeywell Home PROA7?
To disarm the Honeywell Home PROA7, enter a valid code during entry delay or when the alarm is triggered. To power down, remove AC and battery. Learn more here.
What is the Default Master Code on a Resideo PROA7?
The default Master Code on the PROA7 is 1234. This code should be updated to a more secure one as soon as you begin using your system. Keep reading for details.
Can A Resideo PROA7 Support All Resideo CO Detectors?
No, from the box the PROA7 only supports PROSIX sensors. SiX sensors can be added along with a PROTAKEOVER to support legacy wireless. Learn about the PROA7.
How Do I Install an LTE Unit To a PROA7 or PROA7PLUS?
To install an LTE module, be sure the panel is powered down and dismounted. Turn it over and remove the side cover and install the module. Click for details.
How Do I Install a Honeywell Home PROA7 or PROA7PLUS?
Mount the system to the wall or desk mount it, then program all your peripherals and activate the system. Click here to get all the details of installation.
Can I Program a 5834-4 Key Fob to a Resideo PROA7PLUS?
No, even with a PROTAKEOVER Module, the PROA7PLUS will not support the 5834-4. If you need a key fob you must use the PROSIXFOB. Click here to learn more.
Do All Resideo Smoke/Heat Detectors Work With PROA7PLUS?
Out of the box, only PROSIX Series wireless sensors will work. You can add compatibility for legacy RF devices with the PROTAKEOVER. Read here for details.
How Do I Enter Walk Test on a Honeywell Home PROA7PLUS?
To enter walk test, from the home screen press Menu (≡) > Tools > Installer or Master Code > System Tests > Test Sensors > Start Test. Get all the details here.
What Can I Use In Place of a MIMOlite Z-Wave Relay?
Now that the MIMOlite Z-Wave relay is gone, we recommend the Zooz ZEN16 Relay for some applications. Click here to find out what you can do with this relay.
The PROA7PLUSC must be connected to the same WIFI network as the cameras. Compatible cameras must be enabled for viewing. Click here for full instructions.
Added:
How Do I Turn off My Honeywell Home PROA7?
To disarm the Honeywell Home PROA7, enter a valid code during entry delay or when the alarm is triggered. To power down, remove AC and battery. Learn more here.
Added:
What is the Default Master Code on a Resideo PROA7?
The default Master Code on the PROA7 is 1234. This code should be updated to a more secure one as soon as you begin using your system. Keep reading for details.
Added:
Can A Resideo PROA7 Support All Resideo CO Detectors?
No, from the box the PROA7 only supports PROSIX sensors. SiX sensors can be added along with a PROTAKEOVER to support legacy wireless. Learn about the PROA7.
Added:
How Do I Install an LTE Unit To a PROA7 or PROA7PLUS?
To install an LTE module, be sure the panel is powered down and dismounted. Turn it over and remove the side cover and install the module. Click for details.
Added:
How Do I Install a Honeywell Home PROA7 or PROA7PLUS?
Mount the system to the wall or desk mount it, then program all your peripherals and activate the system. Click here to get all the details of installation.
Added:
Can I Program a 5834-4 Key Fob to a Resideo PROA7PLUS?
No, even with a PROTAKEOVER Module, the PROA7PLUS will not support the 5834-4. If you need a key fob you must use the PROSIXFOB. Click here to learn more.
Added:
Do All Resideo Smoke/Heat Detectors Work With PROA7PLUS?
Out of the box, only PROSIX Series wireless sensors will work. You can add compatibility for legacy RF devices with the PROTAKEOVER. Read here for details.
Added:
How Do I Enter Walk Test on a Honeywell Home PROA7PLUS?
To enter walk test, from the home screen press Menu (≡) > Tools > Installer or Master Code > System Tests > Test Sensors > Start Test. Get all the details here.
Added:
What Can I Use In Place of a MIMOlite Z-Wave Relay?
Now that the MIMOlite Z-Wave relay is gone, we recommend the Zooz ZEN16 Relay for some applications. Click here to find out what you can do with this relay.
Added: