What Z-Wave Devices Work w/ a Honeywell L5210 Alarm System?
Z-Wave home automation devices work with a Honeywell L5210 Alarm System. This includes lights, door locks, thermostats, water valves, and more. You need an L5100-ZWAVE Module installed in the L5210 to support the devices. But the L5210 cannot support Z-Wave security or life-safety sensors.
Z-Wave devices programmed with the L5210 System can be controlled from the panel, as well as remotely from Total Connect 2.0 if the system is monitored. Please note that your monitoring plan must include home automation if you want to control Z-Wave devices remotely through TC2. Automation is included with any Silver Plan or higher from Alarm Grid. You can also use TC2 to set up smart scenes for your Z-Wave devices. This will allow the devices to activate automatically based on a schedule or with system events.
There are a variety of Z-Wave home automation devices that can be used with a Honeywell L5210 System. The main devices are smart lights, door locks, and Z-Wave thermostats. Using these devices with smart scenes can make your life more convenient, and it can help you save money on your energy bills. You can include multiple devices in a single smart scene to have all of them controlled all at once. Remember that an L5100-ZWAVE module is needed to use any Z-Wave devices with the system.
However, it's important to note that you cannot use Z-Wave security, life-safety, or environmental sensors with the system. The Honeywell L5210 Alarm Panel only supports Z-Wave for smart home automation purposes. If you want to use security, life-safety, or environmental devices with the Honeywell L5210 System, you should pick sensors from the Honeywell 5800 Series. This is a very robust sensor lineup that includes nearly every device you could want for an L5210 Panel. The Honeywell L5210 Security System has a built-in 345 MHz wireless transceiver for supporting these devices.
Did you find this answer useful?
We offer alarm monitoring as low as $10 / monthClick Here to Learn More