Honeywell 5800 Motion Detectors Frequently Asked Questions

Which Sensors are Compatible with the Lyric Alarm System?
The Lyric Security System will support encrypted Honeywell SiX Series Sensors that operate at 2.4 GHz. It will also support sensors that operate at 345 MHz. This includes any Honeywell 5800 Series Sensor and any 2GIG Sensor. Find out which sensors are compatible with the Lyric Controller.
Added:

Does a Honeywell 5800PIR-RES Motion Light Up?
A Honeywell 5800PIR-RES Motion will light up when it is in its walk test mode. The sensor will automatically activate this mode whenever it is first powered on. In this mode, the sensor will display a red LED light upon detecting. Learn more about walk test mode on a Honeywell 5800IR-RES.
Added:

Where Should I Install My Motion Detector?
There are several things you should keep in mind when choosing a location for a motion detector. The ideal location for a motion detector is in the corner of a room and away from any windows. The device should be placed 6 to 8 feet off the ground. Learn more about where to install a motion sensor.
Added:

How Do I Turn Off Sensor Supervision for a Honeywell 5800 Series Motion Sensor?
Sensor supervision on a 5800 Series Motion Sensor is used by an alarm system to check-in with the sensor and make sure that it is within range and communicating properly. Turning this off will have the panel not look out for any check-in signals from the sensor. Learn more about sensor supervision.
Added:

How Do I Turn Off Alarm Reporting for a Honeywell 5800 Series Motion Sensor?
Alarm reporting for a Honeywell 5800 Series Motion Sensor can be turned off through zone programming. This will instruct the system to not send out a distress signal to the central station if an alarm event involving that sensor were to occur. Learn more about alarm reporting on a motion sensor.
Added:

How Do I Program a Motion to Arm In Stay Mode on my Honeywell L5210, L7000?
A motion sensor can be armed in stay mode by setting its Response Type to "Perimeter". This will cause the motion to arm in both arm stay and arm away modes.
Added:

How Do I Set Up a Pet Alley Lens On a PIR Motion?
Installing a pet alley lens on a PIR motion is very easy. First remove the front cover and the support frame. Then take out the old lens and install the pet alley lens. Make sure the new lens is properly aligned. Finally, reapply the frame and cover. Learn more about replacing a PIR motion lens.
Added:

How Do I Program a Motion for Night Stay on my Honeywell L5210, L7000?
Programming a motion for Night Stay will bypass the sensor during a regular Arm Stay. However, the motion will still be active if the system is armed in Night Stay mode. The zone for the motion will need to have an "Interior" Response Type. Learn more about programming a motion for Night Stay.
Added:

Microwave vs. Passive Infrared Motion Detectors
Two of the most common methods for detecting motion are microwave sensing and passive infrared technology. These two methods are both highly effective in detecting motion, but they operate in completely different manners. Learn more about microwave vs. passive infrared motion detection.
Added:

What is the Best Honeywell Motion Sensor?
Honeywell offers several security sensors that are designed to detect motion. The best one really depends on the type of setting that it will be used in. Once you consider the application of the sensor, you will be able to determine the best one for your needs. Learn more about motion sensors.
Added: