In-Wall Dimmers Frequently Asked Questions

How Do I Create a Scene In Total Connect 2.0 Via a Phone?
To create a scene in the Total Connect 2.0 mobile app, log in and go to the scenes tab. Click on the add scene icon, and the wizard walks you through it all.
Added:

How Do I Remove a Z-Wave Device from a 2GIG Edge?
Clearing a Z-Wave device is usually done before adding it to a network, or if you no longer intend on using that Z-Wave device. Learn to clear a Z-Wave device from the 2GIG Edge.
Added:

How Do I Add a Z-Wave Device to a 2GIG Edge?
A Z-Wave device paired with the 2GIG Edge can be operated from the panel, or remotely from Alarm.com if the system is monitored. Learn to pair a Z-Wave device with the 2GIG Edge.
Added:

How Do I Add a Z-Wave Switch to My Honeywell Tuxedo Touch?
Once you add a Z-Wave Switch to a Tuxedo Touch, you can control it from the keypad and remotely from TC2 if your monitoring plan includes automation. Learn how to pair a switch.
Added:

How Do I Add a Z-Wave Light to My IQ Panel 2?
Adding a Z-Wave light to your IQ Panel 2 will let you control it from the panel and from Alarm.com if the system is monitored. Learn how to add a Z-Wave light to an IQ Panel 2.
Added:

Can I Install a Smart Switch Without a Neutral Wire?
Not all smart switches require a neutral wire. You can achieve a complete smart lighting setup using Lutron Caseta, no neutral required! Learn about smart lighting with Lutron.
Added:

How Does The Z-Wave Light Status Feature Work With Alarm.com?
On Alarm.com, there is a limit of 10 "uncertified" devices for showing status. "Certified" devices don't count towards the limit. Learn about the ADC Z-Wave light status feature.
Added: