Internet Alarm Communicators Frequently Asked Questions

How Do I Setup a WiFi Security System?
A WIFI security system is an alarm system that uses WIFI to communicate with a central station and/or an interactive service platform. Learn how to setup a WIFI security system.
Added:

Which Alarm Panel Can be Monitored Over the Internet?
In order for an alarm system to receive internet monitoring, an IP communicator is needed. The communicator may need to be added separately. Learn more about internet monitoring.
Added:

What is the Best No-contract Alarm Company?
With our affordable monthly rates, outstanding service and technical support and non-restrictive policies, Alarm Grid is the best no-contract Alarm Company.
Added:

Does the 2GIG GC3 Inform Me if it Loses Internet?
The 2GIG GC3 will not directly notify the user about internet loss. However, the panel can still remain connected to the network by using a cellular backup.
Added:

Will the Central Station Call Me if I Disarm My Alarm just After a False Alarm?
There is a possibility, when you disarm immediately after a false alarm, that the central station will see the cancellation signal, and not call you. Read on!
Added:

What Is the City ID on Honeywell Total Connect?
The City ID is used by the alarm dealer to create a Total Connect account, and is never used by the end-user. Learn more about the City ID by reading here.
Added:

What is an 803 Signal on a VISTA Panel?
When an AlarmNet device on a Vista panel indicates a trouble condition for itself, it uses zone 803, to prevent confusion with a protection zone. Read on!
Added:

Can I Change the Rev Chip on a Vista 21iP?
While you can upgrade the prom chip in a Vista-21iP, it may not always be advantageous to do so. Find out when you should, or shouldn’t upgrade the chip.
Added:

What is Advanced Protection Logic (APL)?
Honeywell's APL protects LYNX Touch and Lyric security systems.
Added:

How Do I Add WIFI To An L5200?
Learn how to add WIFI to a L5200
Added: