Security Key Fobs Frequently Asked Questions

How Do I Find the Serial Number on a Honeywell Key Fob?
The Serial Number for a Honeywell Key Fob can be found on the back of the device on a sticker. Or it can be found by enrolling it to a panel. Learn how to find a key fob SN.
Added:

How Do I Add a Key Fob to My Honeywell Lyric Alarm System?
The Lyric has a menu for enrolling new key fobs. Enter the Serial Number field, and activate the top 2 buttons on the fob to enroll it. Learn to enroll a key fob with a Lyric.
Added:

What is an Alarm System Key Fob and What Does it Do?
Many users set up key fobs with their alarm systems. These are handheld devices that can be used to quickly perform system functions. Learn more about key fobs and how they work.
Added:

How Do I Add a Key Fob to a Qolsys IQ Panel 2?
A key fob is learned-in with an IQ Panel 2 by putting the system into learn mode and then pressing the lock and unlock buttons on the key fob at the same time. The panel should then recognize the key fob and enroll it. You can then adjust its settings. Learn how to add a key fob to the IQ Panel 2.
Added:

How Do I Program a Key Fob to an Interlogix Simon XT?
To program a Key Fob with an Interlogix Simon XT, you must access the System Programming Menu. From this menu, you can put the Simon XT in its learn mode. The key fob is then auto-enrolled by pressing and holding its top two buttons. Learn how to program a key fob with a Simon XT System.
Added:

How Do I Add a Key Fob to an Interlogix Simon XT?
A key fob is enrolled with an Interlogix Simon XT through the System Programming Menu. With the system in its learn more, press and hold the top two buttons on the key fob. This will enroll it with the system. You must then adjust its settings. Learn more about using a key fob with a Simon XT.
Added:

What's the Difference Between ADT Key Fobs & Honeywell 5834-4
An ADT Key Fob is basically the same device as a Honeywell 5834-4. It is ADT's rebranded version of the same key fob. Many users bring these fobs to new alarm companies and use them like a 5834-4. There's no need to "take over" one, since they work with multiple panels. Learn more about key fobs.
Added:

How Do I Update the Firmware on my SIXFOB?
The firmware on a SiXFOB can be updated in a relatively simple process. You will need the Master Code for the system to complete the process. The firmware for the SiXFOB is upgraded through the advanced settings menu on the Lyric Controller. Learn more about updating the SiXFOB firmware.
Added:

How Do I Replace a Keyfob on a 2GIG Go!Control?
Replacing a keyfob on a 2GIG GC2 requires you to access system programming and then change the serial number of the old keyfob to the new one. You will need to know the system installer code to do this. Continue reading to learn the entire process for replacing keyfob on a 2GIG GC2 system.
Added:

How Do I Replace a Keyfob on a 2GIG GC3?
To replace a keyfob on a 2GIG GC3 you must access keyfob programming, locate the old keyfob and change its serial number setting to reflect the new keyfob. You will need to know the installer code for the system to do this. Continue reading to learn how to replace a keyfob on the 2GIG GC3.
Added: