Transmitters Frequently Asked Questions

How Do You Add a 2GIG GB1 to the 2GIG GC3?
A 2GIG GB1 glass break can be added to a GC3 security panel through system programming. You can also change the settings for the glass break from this menu.
Added:

How Do I Program a Wireless Sensor on my Honeywell LYNX Touch?
Wireless sensors can be programmed to a LYNX Touch system through the panel's zone programming menu. You will need the installer code to access the menu.
Added:

How Do You Add a 2GIG PANIC1-345 to the 2GIG GC3?
The PANIC1-345 can be added to a GC3 system through zone programming. You will need to know the installer code for the panel to access zone programming.
Added:

Why Does My Security System Need a Honeywell 5800RP?
A wireless Honeywell security system needs a Honeywell 5800RP to extend the range of its radio frequency. This can solve issues such as RF supervision loss.
Added:

What Is the Best Honeywell Sensor for the 21iP?
The best sensor for the Honeywell Vista 21iP depends on what the sensor is used for. There are many great sensors compatible with the Vista 21iP panel.
Added:

How Do I Activate a Honeywell 5800PIR-RES for Lyric or Lynx Panels
You can activate a Honeywell 5800PIR-RES by programming it into your Honeywell panel. Once activated, make sure to test the sensor in its final location.
Added:

Where Should I Place My 2GIG Door and Window Sensor?
A 2GIG door and window sensor should be placed on a door or window frame about half an inch from its magnet. It must also be within range of the 2GIG panel.
Added:

Which Sensors are Compatible with 2GIG?
Many sensors are compatible with 2GIG security panels. In addition to the 2GIG brand of wireless sensors, Honeywell 5800 Series sensors can be used as well.
Added:

How Do I Make My Honeywell L5200 Work w/ AlarmNet 360?
The Honeywell L5200 will need a communicator installed to be able to work with AlarmNet 360. The learn how an alarm company can register the panel, read on.
Added:

How Do You Add a 2GIG DW10 to the 2GIG GC3?
A DW10 door and window sensor can be added to the 2GIG GC3 through the system's programming menu. The installer code is needed to access the programming menu.
Added: