Wireless Alarm Systems Frequently Asked Questions
How Do I Program a SiXPIR to the Lyric Gateway?
In order to enroll a SiXPIR with a Lyric Gateway system, you must contact your alarm monitoring company and have them put the Lyric Gateway into learn mode.
Is a Honeywell 5818MNL compatible with a 2GIG GC3?
As a 5800 Series sensor, the Honeywell 5815MNL is compatible with the 2GIG GC3. No additional add-ons are needed to use the 5818MNL with a 2GIG GC3 panel.
How do I Install the XCVR2 on my 2GIG GC3 Alarm Panel?
The XCVR2 is not compatible with the 2GIG GC3, instead, install the XCVR3-GC3 to support the Image2-GC3 image sensor. Read on to see how it installs.
How Do I Add a Remote Keypad to the Qolsys IQ Panel 2?
A keypad can be added to the Qolsys IQ Panel 2 by pairing the keypad with the panel from the installer menu. Only the IQ Remote will work as a remote keypad.
How Do I Program a SiXFOB to a Lyric Gateway?
The only way to learn-in a SiXFOB with a Lyric Gateway is to have your monitoring company remotely put the Gateway into learn mode and then enroll the device.
How Do I Add a 5869 to a LYNX Touch or Lyric System?
A Honeywell 5869 can be added to a LYNX Touch or a Lyric system by programming the device to the panel and then installing the device in a desired location.
How Do You Add a 2GIG AC2-PLUG to the 2GIG GC3?
The 2GIG AC2-PLUG power transformer connects directly to female barrel connection of the 2GIG GC3. Using the AC2-PLUG will make it easier to power the panel.
How Do I Program a Window Sensor to a Honeywell L5100?
A window sensor can be programmed into an L5100 through the zone programming menu of the panel. You will need the panel's installer code to access this menu.
How Do I Program a 5834-4 Key Fob to an L3000?
A 5834-4 key fob can be programmed into an L3000 system through the programming menu of the panel. You will need the installer code to access this menu.
How Do I Add a Honeywell 5811 to a Lynx Touch?
A 5811 wireless sensor can be programmed to a Honeywell LYNX Touch alarm system through system programming. Make sure to test the sensor after programming.
In order to enroll a SiXPIR with a Lyric Gateway system, you must contact your alarm monitoring company and have them put the Lyric Gateway into learn mode.
Added:
Is a Honeywell 5818MNL compatible with a 2GIG GC3?
As a 5800 Series sensor, the Honeywell 5815MNL is compatible with the 2GIG GC3. No additional add-ons are needed to use the 5818MNL with a 2GIG GC3 panel.
Added:
How do I Install the XCVR2 on my 2GIG GC3 Alarm Panel?
The XCVR2 is not compatible with the 2GIG GC3, instead, install the XCVR3-GC3 to support the Image2-GC3 image sensor. Read on to see how it installs.
Added:
How Do I Add a Remote Keypad to the Qolsys IQ Panel 2?
A keypad can be added to the Qolsys IQ Panel 2 by pairing the keypad with the panel from the installer menu. Only the IQ Remote will work as a remote keypad.
Added:
How Do I Program a SiXFOB to a Lyric Gateway?
The only way to learn-in a SiXFOB with a Lyric Gateway is to have your monitoring company remotely put the Gateway into learn mode and then enroll the device.
Added:
How Do I Add a 5869 to a LYNX Touch or Lyric System?
A Honeywell 5869 can be added to a LYNX Touch or a Lyric system by programming the device to the panel and then installing the device in a desired location.
Added:
How Do You Add a 2GIG AC2-PLUG to the 2GIG GC3?
The 2GIG AC2-PLUG power transformer connects directly to female barrel connection of the 2GIG GC3. Using the AC2-PLUG will make it easier to power the panel.
Added:
How Do I Program a Window Sensor to a Honeywell L5100?
A window sensor can be programmed into an L5100 through the zone programming menu of the panel. You will need the panel's installer code to access this menu.
Added:
How Do I Program a 5834-4 Key Fob to an L3000?
A 5834-4 key fob can be programmed into an L3000 system through the programming menu of the panel. You will need the installer code to access this menu.
Added:
How Do I Add a Honeywell 5811 to a Lynx Touch?
A 5811 wireless sensor can be programmed to a Honeywell LYNX Touch alarm system through system programming. Make sure to test the sensor after programming.
Added: