Frequently Asked Questions
What Is a Go!Bridge?
The 2GIG GC2 System offers no method for IP connectivity out of the box. But you can add a Go!Bridge module to connect the system to an IP network. Learn about the Go!Bridge.
Which Alarm Panels Does the CDMA-X Work With?
The CDMA-X is a cellular communicator designed for use with VISTA Systems. It has since been replaced by the more advanced Honeywell LTE-XV. Learn about cellular communicators.
What Is a TG-1 Express Alarm Communicator?
If you have an older panel with a phone dialer, then you might add a TG-1 Express to allow it to communicate across a cellular network. Learn about the TG-1 Express.
Where Should I Install a Heat Detector?
Certain areas of the home are better-suited for heat sensors than smoke sensors. Using heat sensors instead of smoke sensors can prevent false alarms. Learn about heat detectors.
What Does a Qolsys IQ Panel 2 Plus Kit Include?
Each Qolsys IQ Panel 2 Plus Kit from Alarm Grid has a new IQ Panel 2 Plus, some door and window contacts, a motion sensor, a power cable and a transformer. Learn about these kits.
Can I Get an Alarm or a Specific Zone to Activate My Honeywell IP Camera?
By setting up a notification in Total Connect 2.0, you can have your Honeywell IP Cameras start recording when a specific system activity occurs. Learn about Honeywell IP Cameras.
Is the Tuxedo Touch WIFI an AlarmNet Communicator?
The Tuxedo Touch WIFI is a keypad and a Z-Wave controller that can connect with a local WIFI network. But it is not an alarm monitoring communicator. Learn about the Tuxedo Touch.
Can I Connect to Total Connect 2.0 Using My Tuxedo Touch WIFI?
The Tuxedo Touch is not an alarm monitoring communicator. You cannot use a Tuxedo Touch alone to connect an alarm system with Total Connect 2.0. Learn about the Tuxedo Touch.
How Do You Add A 2GIG KEY2-345 To The 2GIG GC3?
Add a keyfob by entering programming, and providing the requested information. To complete this, you will need the Installer Code. Learn to program the 2GIG KEY2-345 to the GC3.
What Is the Maximum Distance a Honeywell 5800PIR-COM Can Be From the Panel?
The Honeywell 5800PIR-COM can transmit signals a maximum distance of 200 feet in open air. A wireless repeater can increase this range. Learn about the Honeywell 5800PIR-COM.
The 2GIG GC2 System offers no method for IP connectivity out of the box. But you can add a Go!Bridge module to connect the system to an IP network. Learn about the Go!Bridge.
Added:
Which Alarm Panels Does the CDMA-X Work With?
The CDMA-X is a cellular communicator designed for use with VISTA Systems. It has since been replaced by the more advanced Honeywell LTE-XV. Learn about cellular communicators.
Added:
What Is a TG-1 Express Alarm Communicator?
If you have an older panel with a phone dialer, then you might add a TG-1 Express to allow it to communicate across a cellular network. Learn about the TG-1 Express.
Added:
Where Should I Install a Heat Detector?
Certain areas of the home are better-suited for heat sensors than smoke sensors. Using heat sensors instead of smoke sensors can prevent false alarms. Learn about heat detectors.
Added:
What Does a Qolsys IQ Panel 2 Plus Kit Include?
Each Qolsys IQ Panel 2 Plus Kit from Alarm Grid has a new IQ Panel 2 Plus, some door and window contacts, a motion sensor, a power cable and a transformer. Learn about these kits.
Added:
Can I Get an Alarm or a Specific Zone to Activate My Honeywell IP Camera?
By setting up a notification in Total Connect 2.0, you can have your Honeywell IP Cameras start recording when a specific system activity occurs. Learn about Honeywell IP Cameras.
Added:
Is the Tuxedo Touch WIFI an AlarmNet Communicator?
The Tuxedo Touch WIFI is a keypad and a Z-Wave controller that can connect with a local WIFI network. But it is not an alarm monitoring communicator. Learn about the Tuxedo Touch.
Added:
Can I Connect to Total Connect 2.0 Using My Tuxedo Touch WIFI?
The Tuxedo Touch is not an alarm monitoring communicator. You cannot use a Tuxedo Touch alone to connect an alarm system with Total Connect 2.0. Learn about the Tuxedo Touch.
Added:
How Do You Add A 2GIG KEY2-345 To The 2GIG GC3?
Add a keyfob by entering programming, and providing the requested information. To complete this, you will need the Installer Code. Learn to program the 2GIG KEY2-345 to the GC3.
Added:
What Is the Maximum Distance a Honeywell 5800PIR-COM Can Be From the Panel?
The Honeywell 5800PIR-COM can transmit signals a maximum distance of 200 feet in open air. A wireless repeater can increase this range. Learn about the Honeywell 5800PIR-COM.
Added: