Frequently Asked Questions
Does a 5800COMBO Do Low-Temp & Freeze Detection Like the 5808W3?
The 5800COMBO offers a low-temperature and freeze detection function that works in the same way as the low-temperature detection function on the 5808W3. This is done by setting the device to loop number 3 within zone programming. Learn more about the 5800COMBO and its programmable functions.
Can I use the Lynx-WEXT with my Qolsys IQ Panel 2?
Yes, the Lynx-WEXT can be used with the Qolsys IQ Panel 2. By adding the Lynx-WEXT to your Qolsys panel, an external siren, or sirens, drawing up to 1.2 Amps of current can be supported. The Lynx-WEXT contains everything except the siren. Learn more about adding a high current siren here.
How Does a Fire Detector Work?
There are two primary methods for detecting a fire. These are through either smoke detection and heat detection. For that reason, a "fire detector" is more commonly referred to as a "smoke detector" or a "heat detector". There are also combo smoke and heat sensors. Learn more about these devices.
Where Should I Install My Motion Detector?
There are several things you should keep in mind when choosing a location for a motion detector. The ideal location for a motion detector is in the corner of a room and away from any windows. The device should be placed 6 to 8 feet off the ground. Learn more about where to install a motion sensor.
What Is the Best Alarm Contact?
There is no single best alarm contact. Many different types of door and window contacts are available, and the best one depends on the needs of the user. There are several questions to ask when looking for an alarm contact so that you can obtain the perfect one. Learn more about alarm contacts.
How Do I Turn Off Alarm Reporting for a Honeywell 5800 Series Motion Sensor?
Alarm reporting for a Honeywell 5800 Series Motion Sensor can be turned off through zone programming. This will instruct the system to not send out a distress signal to the central station if an alarm event involving that sensor were to occur. Learn more about alarm reporting on a motion sensor.
How Do I Wire a 4-Wire Smoke Detector to My Wired Alarm System?
Connecting a 4-wire smoke detector to a wired alarm system is a slightly more complicated process than setting up most other hardwired zones. Several wired connections will need to be made. The setup will also require an end of line resistor and a relay module. Learn more about 4-wire smokes.
How Do I Remove a Z-Wave Device from Alarm.com?
There are three ways to remove a Z-Wave device from Alarm.com. The first is to manually exclude the sensor using the panel. The second is to have the alarm monitoring company remove the sensor. The third is to reset the Z-Wave controller and rebuild the network. Learn more about Z-Wave devices.
What's the Best Place to Install a Smoke Detector?
When choosing a location for a smoke detector, there are some things to remember. For example, it should be placed away from any vents or ducts that might affect its performance. It should also be at least 10 feet away from any kitchen appliances. Learn more about where to place a smoke detector.
How Do I Install an Alarm.com Camera?
Most Alarm.com Cameras are installed in a very similar manner. These cameras come with a mounting plate and screws. After drilling some holes, the mounting plate can be screwed into the wall. The camera can then be attached to the mounting plate. Learn more about installing an Alarm.com Camera.
The 5800COMBO offers a low-temperature and freeze detection function that works in the same way as the low-temperature detection function on the 5808W3. This is done by setting the device to loop number 3 within zone programming. Learn more about the 5800COMBO and its programmable functions.
Added:
Can I use the Lynx-WEXT with my Qolsys IQ Panel 2?
Yes, the Lynx-WEXT can be used with the Qolsys IQ Panel 2. By adding the Lynx-WEXT to your Qolsys panel, an external siren, or sirens, drawing up to 1.2 Amps of current can be supported. The Lynx-WEXT contains everything except the siren. Learn more about adding a high current siren here.
Added:
How Does a Fire Detector Work?
There are two primary methods for detecting a fire. These are through either smoke detection and heat detection. For that reason, a "fire detector" is more commonly referred to as a "smoke detector" or a "heat detector". There are also combo smoke and heat sensors. Learn more about these devices.
Added:
Where Should I Install My Motion Detector?
There are several things you should keep in mind when choosing a location for a motion detector. The ideal location for a motion detector is in the corner of a room and away from any windows. The device should be placed 6 to 8 feet off the ground. Learn more about where to install a motion sensor.
Added:
What Is the Best Alarm Contact?
There is no single best alarm contact. Many different types of door and window contacts are available, and the best one depends on the needs of the user. There are several questions to ask when looking for an alarm contact so that you can obtain the perfect one. Learn more about alarm contacts.
Added:
How Do I Turn Off Alarm Reporting for a Honeywell 5800 Series Motion Sensor?
Alarm reporting for a Honeywell 5800 Series Motion Sensor can be turned off through zone programming. This will instruct the system to not send out a distress signal to the central station if an alarm event involving that sensor were to occur. Learn more about alarm reporting on a motion sensor.
Added:
How Do I Wire a 4-Wire Smoke Detector to My Wired Alarm System?
Connecting a 4-wire smoke detector to a wired alarm system is a slightly more complicated process than setting up most other hardwired zones. Several wired connections will need to be made. The setup will also require an end of line resistor and a relay module. Learn more about 4-wire smokes.
Added:
How Do I Remove a Z-Wave Device from Alarm.com?
There are three ways to remove a Z-Wave device from Alarm.com. The first is to manually exclude the sensor using the panel. The second is to have the alarm monitoring company remove the sensor. The third is to reset the Z-Wave controller and rebuild the network. Learn more about Z-Wave devices.
Added:
What's the Best Place to Install a Smoke Detector?
When choosing a location for a smoke detector, there are some things to remember. For example, it should be placed away from any vents or ducts that might affect its performance. It should also be at least 10 feet away from any kitchen appliances. Learn more about where to place a smoke detector.
Added:
How Do I Install an Alarm.com Camera?
Most Alarm.com Cameras are installed in a very similar manner. These cameras come with a mounting plate and screws. After drilling some holes, the mounting plate can be screwed into the wall. The camera can then be attached to the mounting plate. Learn more about installing an Alarm.com Camera.
Added: