DSC HS2032NK Frequently Asked Questions

How Do I Power Cycle My Wired Alarm System?
Performing a power cycle reset of your wired alarm system is very easy! All you have to do is follow these simple steps. Learn to power cycle your wired security system.
Added:

How Do I Reset My Wired Alarm System?
A "reset" for an alarm system can refer to a factory reset or a power cycle reset. Each type of reset serves a different purpose. Learn to reset your wired alarm system.
Added:

How Do I Enroll a Z-Wave Device with a DSC PowerSeries Neo Panel?
For a DSC PowerSeries NEO, its Alarm.com Dual-Path Communicator doubles as a Z-Wave controller. Learn how to pair a Z-Wave device with your DSC PowerSeries NEO System.
Added:

How Do I Use the Alarm.com In-App Panic Feature?
The Alarm.com In-App Panic allows you to send an alert to the central station. Police, Fire, and Auxiliary Panics can be performed. Learn how to use the Alarm.com In-App Panic.
Added:

How Do I Program a Hardwired Zone to a DSC PowerSeries NEO?
A DSC PowerSeries NEO Panel will have on-board zones for adding hardwired sensors. A wired expansion module can also be used. Learn how to add a wired zone to the NEO.
Added:

How Do I Program a Wireless Zone to a DSC PowerSeries NEO?
Adding a compatible transceiver module will allow you to enroll PowerG Sensors to wireless zones on a PowerSeries NEO System. Learn how to program PowerSeries NEO wireless zones.
Added:

How Do I Update the Firmware On a DSC PowerSeries NEO?
Firmware Updates for the NEO can be pushed down from Alarm.com. An IP connection or a cellular connection can be used to push the update. Learn how to update NEO firmware.
Added:

How Do I Upgrade a DSC PowerSeries NEO System to Use LTE?
By installing and activating an LTE communicator with a DSC PowerSeries NEO, the panel can communicate with Alarm.com across a cellular network. Learn how to upgrade a NEO to LTE.
Added:

How Do I Delete a Zone From a DSC PowerSeries NEO?
If you have a sensor that you no longer wish to use with a DSC PowerSeries NEO System, then you will need to delete the zone. Find out delete a zone from a DSC PowerSeries NEO.
Added:

How Do I Enroll a PowerG Sensor to a DSC PowerSeries NEO?
Programming menu 804 lets you auto-enroll sensors to a PowerSeries NEO. The panel must have an added transceiver module. Learn how to add PowerG Sensors to a DSC PowerSeries NEO.
Added: