Honeywell 5808W3 Frequently Asked Questions

How Do I Program the Honeywell 5808W3 to the L7000?
The Honeywell 5808W3 is learned-in with the Honeywell L7000 through system programming. Learn how to program the Honeywell 5808W3 with the Honeywell L7000 Security Panel.
Added:

How Do I Program the Honeywell 5808W3 to the 2GIG GC2?
The 5808W3 learns-in with the GC2 by accessing the System Configuration Menu and then following the steps to learn-in a new sensor. Learn to program the 5808W3 with the 2GIG GC2.
Added:

How Do I Program the Honeywell 5808W3 to the 2GIG GC3?
The Honeywell 5808W3 can learn-in with the 2GIG GC3 through its wireless enrollment mode. It will require two zones for full functionality. Learn how to enroll a 5808W3.
Added:

How Do You Delete a Honeywell Wireless Device?
First, enter zone programming. Next, set the zone type to "Not Used". Finally, confirm you want to delete the zone. Learn how to delete a wireless device from the system.
Added:

Are Honeywell Smokes Compatible w/ Google Home?
A Honeywell Smoke Detector will work with Google Home if the panel's interactive service is compatible. Find out if your smoke detectors are compatible with Google Home.
Added:

2GIG SMKT3-345 vs Honeywell 5808W3
The 2GIG SMKT3-345 and the Honeywell 5808W3 both operate at the 345 MHz wireless frequency. Both devices provide smoke and heat detection. Both the SMKT3-345 and the 5808W3 offer freeze detection capabilities as well. Learn more information about these two wireless smoke and heat detectors.
Added:

How Do I Install the Honeywell 5808W3?
The Honeywell 5808W3 Smoke and Heat Detector is installed by first choosing a location for the device and then using the included screws and wall anchors to install the mounting plate. The device can then be attached to the mounting plate. Learn more about installing the Honeywell 5808W3.
Added:

How Do I Test My Honeywell 5808W3?
The Honeywell 5808W3 features a test switch on the device for testing its functionality. A user can also test the device using canned smoke and a hair dryer. The user must remember to place their system on test mode before testing the 5808W3. Learn more about testing a Honeywell 5808W3.
Added:

How Do I Program the Honeywell 5808W3 to the L5210?
The Honeywell 5808W3 is programmed with a Honeywell L5210 through the panel's zone programming menu. The device can be auto-enrolled and have all of its settings adjusted within this menu. The device requires three zones to perform all of its functions. Learn more about programming the 5808W3.
Added:

How Do I Program the Honeywell 5808W3 to the Lyric Security System?
The Honeywell 5808W3 is programmed with the Lyric Security System through the zone programming menu of the panel. To access this menu, the user will need to know the Installer Code for the system. This menu is also used to adjust any settings for the device. Learn more about programming a 5808W3.
Added: